Thread: Stuck at iAtkos L2 Screen. Please help me ...

please help me :S

guys...

I tried to put the dmg image of itkos l2 onto a pendrive using transmac and used chameleon bootloader(which i mentioned earlier in this thread) to boot from the pendrive

i used these

-v -f

and

-v -x

and

-v -f Graphicsenabler=No arch=x86_64 ncpi=0x2000

and in all the 3 times some HFS+ files or something were shown to be loaded and the it came and got stuck on the following screen:
IMG_9296.jpg

plz tell me what to do..

In a lot of laptops the problem isn't as cut and dried as these helpers may think. Take this one set I currently have for example. It came with Nvidia Optimus, which might be the culprit, but I can't say for sure. Anyway this is where I'm stuck at.

P1060857.jpg

Recall what this guy said.

Originally Posted by noname

On Chameleon boot screen. When you see Chameleon loading, then type f8. HAve you enabled AHCI in BIOS? Do you use usb keyboard? These things could help too...

@abhiank209

Use -v -f or -v -x flags. Post your configuration.

See my picture above. USB keyboard attached.

AHCI enabled?

P1060858.jpg

Check.

My problem? Pressing F8--or indeed, any key at all, gets me stuck on Chameleon screen. Just let bootloader countdown to 0 itself? The same problem. No F8 means no flags. No flags means no hope.

Now you're likely to tell me to burn another copy of iAtkos. You're wrong. I've successfully installed this disc on 5 different systems with different specs.

So anyone else have a better idea?

i tried a lotta thing ...and asked around a lot in this forum...no1's replying witha solution man...!!

i just gave up on the project ....WINDOWS 7 goes on....


and if you have read all the posts on this......and tried all that ,,,, that i tried then after booting thru chameleon ( i've given the link to which in this post ) then you gotta use the boot flag cpus=1.....

i tried that too but it still didnt work...though it got stuck at a different place.....try it nyways...it might just work

its maybe you have only bootfiles it could be you know

damn, im not find this solution on the page 4.. i have the same issue.

specs:
Type: Lenovo Ideapad y470p
Processor : i7 2670QM 2.26-3.2Ghz
Graphics : ATI HD 7690M (2048Mb) with switchable Intel HD 3000 512MB
Memory : 8GB
Audio : Realtek ALC272
Network : LAN Broadcom NetLink (TM) Gigabit Ethernet
Wi-fi : Atheros AR9285 Wifi
Bluetooth : Broadcom Bluetooth 2.1
Webcam : Lenovo EasyCamera
USB 3.0 : NEC uPD720200 USB 3.0 Host Controller
Battery : Li-on
Touchpad : Synaptics PS/2 Port TouchPad

try the first page...and check my posts...and posts by "noname"......you might find some useful info........but be sure to read all the posts on that page...!!!...

i was still looking for a solution....but not anymore.......my nice parents bought me a 13''macbook pro......!!!!

Hey guys,

in order to not stuck on this f**** gray screen, use USB flash instead of DVD disk as it is known issue for iAtkos L2.
please check this thread for more information:
[Guide] Install Mac OS x Lion on Asus K53E [Laptop] - InsanelyMac Forum

you can also apply this method to any PC platform (up to installation phase)
preparations are the same.