Thread: unable to install IAtkos L2 kernel panic

HI All,

i am trying to install IAtkos L2 on my vaio but whenever i try to install it cause kernel panic. i tried searching for solution but unable to find any.

error :

panic (cpu 0 caller 0x2ccb0f), kernel trap..

here is the screen shot

IMG-20120621-00087.jpg

my system config are :

Sony Vaio
CPU : intel i3 370M
MoBo : Intel HM55
Ram : 3 gig
HDD : 120 GB


i dont know how to get past this error

try bootflags before launching the install, type -x -v cpus=1 (we never know) and if it hangs, post a photo, normally it should be good, and you'll reach install page, be patient, it take a little time to get there

good luck

Hello Andry,

Thanks for the reply... i understand it takes time and i really am patient

as you suggested i tried booting with the DVD with following flags -x -v cpus=1 and the output remains the same. here's the screenshot

IMG-20120625-00088.jpg

i also tried installing IAtkos S3 V2 as well with same flags but it also keeps going in infinite reboot loop.

is it some sort of Kext which is causing cpu panic or something else or is my CPU not compatible ?.. i saw on HCL page few have been able to install L2 on i3 370M

www.iAtkos.tk: How to install iATKOS L2 10.7.2 on Sony Vaio VPCEB3J0E/W

try this and good luck

Hello Andry,

i tried installing with the flags mentioned in the link and it failed again with exactly same set of errors. i even tried with busratio=18 -v but to no avail.

my sony vaio model is VPCS133GN.

can it be the corrupt download ? or bad DVD write. although the checksum MD5 were same which i matched through the tool mentioned in the Torrent link.

Help !!!!

so no other option or way around available to install Lion on my machine ?

Hello!!

I have the same problem. I have read somewhere that Lion needs Dual core, but not sure. I have buy a new processor but still waiting.

Also I have tryed changing the kernel. With osx hard disc tools, I have restored iAtkos on a usb and added all osx.net kernels .... but same problem. Also thinking in use snow leo iatkos kernel ....

Originally Posted by lucksin

so no other option or way around available to install Lion on my machine ?

let we try to fix it little bit:
1. Make sure you've burned your DVD with lower burning rate ...example 4x.

2. Check your BIOS:
SATA must be AHCI
Do you have optimus VGA Card ? if Yes...switched it to "Integrated"..... if NO, continue below:

3. boot from your usb/dvd with bootflag " -v "..

post here the result...

i am also having same problem. if u got any solution for it please send me message.
Even email me: [email protected]