Thread: Need help with iAtkos L2

Hi,

I don't know what should I choose in [ customize ]

plz help .

http://upload.traidnt.net/upfiles/oQB36624.png

http://upload.traidnt.net/upfiles/7SM36551.png

http://upload.traidnt.net/upfiles/vi536504.png

For core i5 430 you may need to boot usb stick with
-v npci=0x2000 busratio=17
perhaps another bus ratio like busratio=18

but I do not know if ATI Radeon 4300 works.
I only use nvidia cards.

and please post your system specs. like chipset, audio and network controller etc.
Is it a laptop ?

Smilee is correct. Choosing -v npci=0x2000 busratio=17, although I would try npci=0x3000.

Which OS are you trying to install and which media are you going to use for your install, DVD or USB. Are you going to use an different HDD for your install or one with Windows on it already.

Originally Posted by smilee

For core i5 430 you may need to boot usb stick with
-v npci=0x2000 busratio=17
perhaps another bus ratio like busratio=18

but I do not know if ATI Radeon 4300 works.
I only use nvidia cards.

and please post your system specs. like chipset, audio and network controller etc.
Is it a laptop ?

Originally Posted by hulkintosh

Smilee is correct. Choosing -v npci=0x2000 busratio=17, although I would try npci=0x3000.

Which OS are you trying to install and which media are you going to use for your install, DVD or USB. Are you going to use an different HDD for your install or one with Windows on it already.

I installed windows 8 in my laptop .
and i burn iAtkos L2 in a usb with trancMac , and boot from usb , and it's work

the problem is i don't know what i choose in customize before select the partitions .

and this is pictures from everest :

Chipset :






CPU :




Motherboard :




Bios :





Display :




PCI Video :




GPU :




Audio :











Network :








PCI Network :





Bluetooth :







And thanks tor help

somebody help me,I try ti install this version on laptop asus a42f
[IMG][/IMG]

Phenomeno.. which media are you using to install Lion. USB or DVD. It looks like DVD. DVD installs can cause strange problems. It looks like, from the pic you posted, its stopped reading from the DVD drive or that the DVD itself has some sort of scratch/defect and therefore is no longer reading from it. I personally do not recommend trying to install OSX from a DVD and only advise using USB flash drives for installs.

yes i used DVD,i'll try agian with usb,ithinked cause is kext on installion

Proo:

After you choose customize you should choose the following, according to your pics:

Network: Realtek 8139/810. There should be a choice inside the network drop down list for 81xx or it may just list the 8139 driver by itself. Make sure you check just one!!! Not the entire category. Choosing the entire category will almost surely make the network hardware NOT work. If it does not work try this driver. Sorry but wireless is one of the biggest problems of laptop Hackintosh builds. I have never really tried to get wireless to work. but here is a forum that may help. I did not read the entire thing though.

Audio: This is another sticking point. Using this tool I was able to install ,using this path: Drivers, Kext, Audio, Universal, Voodoo HDA 0.2.1. This driver worked for a HP DV5 series laptop. You will have to register on their site to use it but it is a very good tool for installing kexts. Your pic shows you have the Realtek ALC269 audio hardware. If there is anything close to that in the customize menu choose it.
JUST USE IT TO INSTALL KEXTS AND NOT ITS EASY-B TOOL, THIS WILL ALMOST ALWAYS BRICK YOUR INSTALL!!!!

Video. Obviously you have a ATI 4300 Video card. The customize menu should have an ATI choice something close to it. Always choose the closest driver to what you have. I was using an ATI 2400 video card once and the closest there was to it was an 4600 driver. I choose the 4600 driver and it worked fine. If it does not work use the tool I linked to above to install a driver from it. As always make 1 choice from each category at a time. If it does not work, you usually have to reboot to see if it worked or did not work, try another one. Some of the drivers will only take effect after a reboot.

MAKE SURE YOU BACK UP YOUR SYSTEM BEFORE MAKING ANY CHANGES WITH TIME MACHINE, CARBON COPY CLONER OR SOME BACKUP SOFTWARE...SOMETHING IS BETTER THAN NOTHING.

Yes,I install and restart


But:

Ok Phenomeno we are headed in the right direction!! Here is a site with a list of boot flags and explanations as to what each one means.

When at the iAtkos screen where is shows you the 4 partitions/drives just type -v. This is verbose mode. It will show you where the installation stops/errors out. Post a pic of where it stops and the forum can assist you further.