Thread: ALC892 - GA-880GMA-UD2H - Audio Noise

Hello friends,

After three days finally installed Snow Leopard. (10.6.3)

CPU: AMD Phenom II X2 550 Black Edition
Motherboard: Gigabyte GA-880GMA-UD2H
Memory: 4gb DDR3

Graphics ok, Network card ok...but sound not... =x

I've tried all versions of VoodooHDA.kext and all versions of the new MultiBeast 3.8, include the ALC8xxHDA + AppleHDA Rollback + System Utilities solutions and a lot of the others things on the internet...

Sometimes The voodoo control panel seems to works fine, and the in/out seems to be ok...but not without noise, never.

After installing my ALC892 SOUNDS, although accompanied with a lot of "zzzz"-noise when audio is plugged.

ZZZZZZZZZU~UUUUU ~ZZUHMMMZZZ
(only in the snowleo, but w7 my sound works fine)

After these days...I'M VERY TIRED... ;/

I found one guy with the same problem in this forum But...Jul/10:
Realtek ALC892.....VoodooHDA & AppleHDA & LegacyHDA not work! - InsanelyMac Forum

Can someone help?

Originally Posted by leodavi3d

Hello friends,

After three days finally installed Snow Leopard. (10.6.3)

CPU: AMD Phenom II X2 550 Black Edition
Motherboard: Gigabyte GA-880GMA-UD2H
Memory: 4gb DDR3

Graphics ok, Network card ok...but sound not... =x

I've tried all versions of VoodooHDA.kext and all versions of the new MultiBeast 3.8, include the ALC8xxHDA + AppleHDA Rollback + System Utilities solutions and a lot of the others things on the internet...

Sometimes The voodoo control panel seems to works fine, and the in/out seems to be ok...but not without noise, never.

After installing my ALC892 SOUNDS, although accompanied with a lot of "zzzz"-noise when audio is plugged.

ZZZZZZZZZU~UUUUU ~ZZUHMMMZZZ
(only in the snowleo, but w7 my sound works fine)

After these days...I'M VERY TIRED... ;/

I found one guy with the same problem in this forum But...Jul/10:
Realtek ALC892.....VoodooHDA & AppleHDA & LegacyHDA not work! - InsanelyMac Forum

Can someone help?

On 10.6.3 you can try this > VoodooHDA adapted to ALC892 - Downloads - Kexts.com

But if you update to 10.6.6 / 7 or 8, maybe have more things...

Hi Kyndder, (koe rs)

i really tried this kext yesterday...but, i can try it again...wait some minutes

i have now 2 icons of voodoo controlers in control panel but i don't know fix it =/
aihushaushoiahsiauoh ta fods

About updates...when i try to update 10.6.8 i got this problem at boot:[ PCI configuration begin ] kk

Originally Posted by leodavi3d

Hi Kyndder, (koe rs)

i really tried this kext yesterday...but, i can try it again...wait some minutes

Ok...

Originally Posted by leodavi3d

i have now 2 icons of voodoo controlers in control panel but i don't know fix it =/
aihushaushoiahsiauoh ta fods

Go in /Library/PreferencePanes or /System/Library/PreferencePanes and delete one...

Originally Posted by leodavi3d

About updates...when i try to update 10.6.8 i got this problem at boot:[ PCI configuration begin ] kk

Try this flag at boot > npci=0×2000 (read here if you don't know how to use http://www.kexts.com/guides-tutorial...er-basics.html)

Or this > http://www.kexts.com/view/1417-apple...pcifamily.html and follow the instructions on this post > http://www.kexts.com/motherboard-cpu...html#post73599

Hi kyndder,

Thx for ur help.

Well, now i'm trying to update to 10.6.8 with ur guide, because I think the update will help me to install the audio.

but this update isn't working for me...After read about all u sayand try every help, now i've got this new msg:

[Pci configuration begin]
RTC: Only single RAM bank (128 bytes) < new msg


and stop...

Sorry for this, i'm trying but i think the problem is my motherboard and chipset....

By the way...i see now...i'm using Chamaleon v2.0-RC5 r650 to boot system from cd... ???

Some idea? THX

Originally Posted by leodavi3d

Hi kyndder,

Thx for ur help.

Well, now i'm trying to update to 10.6.8 with ur guide, because I think the update will help me to install the audio.

but this update isn't working for me...After read about all u sayand try every help, now i've got this new msg:

[Pci configuration begin]
RTC: Only single RAM bank (128 bytes) < new msg


and stop...

Sorry for this, i'm trying but i think the problem is my motherboard and chipset....

By the way...i see now...i'm using Chamaleon v2.0-RC5 r650 to boot system from cd... ???

Some idea? THX

You try replacing these kexts > http://www.kexts.com/view/1417-apple...pcifamily.html ????

Yes (yesterday with the terminal cp -r from USB to Extensions) (yourGUIDE)

For now, i'm using 2 partitions..."diskOsx1" with the original instalation of 10.6.3 without modification, and other, "diskOsx2" (same copy) but to send instalations from diskOsx1(logged).

Today I used KextWizard...and boot with -f...and sometimes repairing permissions and rebuilding caches... but update not work.

I did try npci=0x2000 on boot and nothing change.

Originally Posted by leodavi3d

Yes (yesterday with the terminal cp -r from USB to Extensions) (yourGUIDE)

For now, i'm using 2 partitions..."diskOsx1" with the original instalation of 10.6.3 without modification, and other, "diskOsx2" (same copy) but to send instalations from diskOsx1(logged).

Today I used KextWizard...and boot with -f...and sometimes repairing permissions and rebuilding caches... but update not work.

I did try npci=0x2000 on boot and nothing change.

What`s your video card???

onboard ATI HD 4250

I ll show u my install order:

1 - HD with 2 partitions: disk1 and disk2
2 - I Install SL 10.6.3 with Chamaleon v2.0-RC5 r650 (disk1 - original instalation without modification)
3 - After install, inside SL(disk1), i make a copy of disk1 to disk2 using Disk Utility.
4 - I boot on disk2 SL to test and see SL OS working. OK
5 - I Install update 10.6.8 to disk2(logged on disk1)

6 - I Try to boot on disk2 with update to test and get this:
[Pci configuration begin]

7 - I go back to boot on disk1 SL and use KextWizard to send original kexts from the version 10.6.7. (your upload).

8 - I boot from disk2 with -F and get this:
[Pci configuration begin]
RTC: Only single RAM bank (128 bytes) < new msg

Originally Posted by leodavi3d

onboard ATI HD 4250

I ll show u my install order:

1 - HD with 2 partitions: disk1 and disk2
2 - I Install SL 10.6.3 with Chamaleon v2.0-RC5 r650 (disk1 - original instalation without modification)
3 - After install, inside SL(disk1), i make a copy of disk1 to disk2 using Disk Utility.
4 - I boot on disk2 SL to test and see SL OS working. OK
5 - I Install update 10.6.8 to disk2(logged on disk1)

6 - I Try to boot on disk2 with update to test and get this:
[Pci configuration begin]

7 - I go back to boot on disk1 SL and use KextWizard to send original kexts from the version 10.6.7. (your upload).

8 - I boot from disk2 with -F and get this:
[Pci configuration begin]
RTC: Only single RAM bank (128 bytes) < new msg

Try with this Chameleon > http://www.kexts.com/view/1429-chame...rc5-r1096.html