Welcome to osx86.net

If you need help with your Hackintosh we have all the drivers, kexts and bootloaders and other stuff that you hadn't figured out you needed yet. Register now to get access to all of the files and forums.


436 files

  1. Modded kexts working well in 10.9.5.
    Also may use this kext to Bluetooth:
    BCM2070 Bluetooth - Mavericks 10.9.5

    2,010 downloads

    0 comments

    Updated

  2. This is a kext in Mountain Lion 10.8.2 edited by me and worked on my PC,Put it in System/Library/Extension/,then repair permissions,reboot and enjoy.sorry for my bad English,Gook Luck!

    6,741 downloads

    9 comments

    Submitted

  3. Alright, guys.

    This is the ultimate wifi/bluetooth combo card for Hackintosh.

    You can buy it here.


    Unzip then run the installer

    BTW, the chipset, as it says in the title, is AR5B195

    1,079 downloads

    2 comments

    Submitted

  4. All courtesy goes to SunLizard at insanelymac:

    http://www.insanelymac.com/forum/topic/279987-solved-atheros-9227-tp-link-wn851nd-not-functioning-properly/

    Issues currently present:

    - auto reconnect might not always reconnect on reboot(I fixed it by turning off the wifi in network preferences, and turning it on again.After that each reboot it reconnected)

    I just edited the kexts.

    I've tested on 10.7.3,10.8 through 10.8.3. It works.I still need someone to try it on 10.8.5.

    I think this WILL cause a kernel panic after a few minutes on i5/i7, but still, give it a shot.I'm using a core2quad and it works just fine.

    This is for the AR9227 chipset, not AR9287.The N version is the one with the 9287, ND is with the 9227.

    DOES NOT WORK ON 10.8.4

    Picture proof:

    http://i.imgur.com/UdmOpwP.png

    don't mind the ID's on the SS, it's the WN851ND with 168c:002d

    949 downloads

    7 comments

    Updated

  5. Inserted device id 168c,2b

    Full working WPA, WPA2, Airport, etc... full support

    5,027 downloads

    4 comments

    Submitted

  6. 12,887 downloads

    11 comments

    Submitted

  7. Added the dev id and venid to the AppleYukon2.kext in the plugins folder. Working pretty well on my VAIO VPCEB16FG.

    779 downloads

    0 comments

    Submitted

  8. Just replace the AppleBCM5701Ethernet.kext to S/L/E/IONetworkingFamily.kext/Contents/PlugIns/ then repair permission and cache kexts. Hope you enjoy it

    2,092 downloads

    6 comments

    Submitted

  9. AR9285 IO80211Family.kext OS X 10.9 (13A476u)
    Modified info.plist file to enable AR9285 chipsets.

    11,598 downloads

    12 comments

    Submitted

  10. Atheros 9287: 4.0.74.0-P2P device id pci168c,2e OSX Mavericks.
    Locale and country fix you can edit info.plist in the DeviceMergeNub.kext.
    Or you use DSDT Code,with your Native IO80211Family.kext,good for OSX Install!
    Device (ARPT) { Name (_ADR, Zero) // _ADR: Address Name (_PRW, Package (0x02) // _PRW: Power Resources for Wake { 0x09, 0x04 }) Method (_DSM, 4, NotSerialized) // _DSM: Device-Specific Method { Store (Package (0x0E) { "name", "pci168c,30", "device-id", Unicode ("0"), "IOName", "pci168c,30", "revision-id", Buffer (0x04) { 0x01, 0x00, 0x00, 0x00 }, "subsystem-id", Buffer (0x04) { 0x9F, 0x00, 0x00, 0x00 }, "subsystem-vendor-id", Buffer (0x04) { 0x6B, 0x10, 0x00, 0x00 }, "vendor-id", Buffer (0x04) { 0x8C, 0x16, 0x00, 0x00 } }, Local0) DTGP (Arg0, Arg1, Arg2, Arg3, RefOf (Local0)) Return (Local0) } }
    Or you add this to FakeSMC info.plist.
    <key>Atheros Wireless LAN PCI</key> <dict> <key>CFBundleIdentifier</key> <string>com.apple.driver.AirPort.Atheros40</string> <key>IOClass</key> <string>AirPort_AtherosNewma40</string> <key>IOMatchCategory</key> <string>IODefaultMatchCategory</string> <key>IONameMatch</key> <array> <string>pci168c,2e</string> </array> <key>IOProbeScore</key> <integer>700</integer> <key>IOProviderClass</key> <string>IOPCIDevice</string> </dict>
    is up to you!
    Good Luck

    6,533 downloads

    57 comments

    Updated

  11. 10.8.4 12E55 IO80211 Family AR9285

    Latest Wireless drivers from 10.8.4, works and tested. I just added the required ID.

    3,427 downloads

    16 comments

    Submitted

  12. updated kext for Atheros 9287 WIFI chip.
    to be compatible with 10.8.4

    tell me if it work for you.

    1,533 downloads

    7 comments

    Submitted

  13. modyfied 80211.kext by ME!!

    Works on my hackintosh 10.8.2 i have TP-LINK WN751ND with AR9287 chipset and now Works fine !!!!

    Install> just copy and replace with original file and reapair premisions!! now reboot!!!
    maybe this work with other card with AR9287
    write a comment !!

    996 downloads

    6 comments

    Submitted

  14. This Bios flash can change Whitelist to remove wifi card bcm 4313 and replace with Atheros 9285 or 9287 or any wifi cards.


    I buy an Atheros 9287 (15$) very easy replace ( fucking bcm 4313 ) with Atheros 9287
    now my hackbook is fully working with any hardwares
    sorry for bad english.

    813 downloads

    12 comments

    Submitted

  15. ENGLISH.:

    Kext patched by me for Wireless Network Adapter / Network controller / Ethernet controller Card Atheros Communications Inc. 168c 001a (168c 1a) AR2413/AR2414 AR5005G AR5005GS 802.11bg

    file.: IO80211Family.kext

    Original of Lion 10.7.4 system
    Tested with Mountain Lion 10.8.3

    Works great for me!

    NOT WORK WITH 10.8.4 AND 10.8.5

    Install in S/L/E with Kext Wizard, after, repair permissions - rebuild cache

    Restart the computer and active the wireless in Systems Preferences / Networks.

    Good Job!

    ___________//___________

    PORTUGU�S.:

    Kext editada por mim para placas de redes wireless Atheros Communications Inc.
    168c 001a (168c 1a) AR2413/AR2414 AR5005G AR5005GS 802.11bg

    Arquivo.: IO80211Family.kext

    Original do Sistema Lion 10.7.4
    Testado no Mountain Lion 10.8.3 (Não funciona com 10.8.4 e nem 10.8.5)
    Funciona bem, ao menos no meu caso!

    Instale em S/L/E com o Kext Wizard, depois, repair permissions - rebuild cache

    Reinicie o computador e ative o wireless iem Preferencias do Sistema / Redes.

    Bom trabalho!

    ___________//_____________

    Information of the card after install the kext in my machine.:

    Vers�es de Software:
    CoreWLAN: 3.0.2 (302.12)
    CoreWLANKit: 2.0.2 (202.10)
    Extra do Menu: 8.0.2 (802.7)
    plug-in configd: 8.3.2 (832.18.1)
    Informa��es do Sistema: 8.0 (800.1)
    Fam�lia IO80211: 4.2 (420.3)
    Diagn�stico da Rede Wi-Fi: 1.1 (110.26)
    Utilit�rio AirPort: 6.2 (620.33)
    Interfaces:
    en2:
    Tipo de Placa: AirPort Extreme (0x168C, 0x1052)
    Vers�o de Firmware: Atheros 5212: 2.1.14.9
    Endere�o MAC:
    Locale: Unknown
    C�digo do Pa�s:
    Modos PHY Compat�veis: 802.11 b/g
    Canais Compat�veis: 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13
    Estado: Conectado

    3,167 downloads

    10 comments

    Updated

  16. I updated this injector to work with 10.8.x
    With this injector, you no longer have to patch/touch/hack the original IO80211Family.kext (specifically, the plugin AirPortAtheros40.kext) every time there's a system update.

    Tested with AR5B95 (pci168c,2b)

    Just install this kext using your favourite Kext installer into /System/Library/Extensions

    14,613 downloads

    41 comments

    Submitted

  17. Hello,

    I've been looking for a solution myself and they told me at the end
    even answered.

    This kext is original a DWA-160 kext with application.

    The kext is modified for a TP-LINK WN821N v2 USB adapter. The v1
    Version has another Vendor ID i think. V3 and V4 doesn't work because
    they have another chipset.

    1. Install kext with kexthelper or KB{censored}
    2. boot your mac in 32-bit mode (arch=i386)
    3. start DWA-160 application and have fun.

    It works only in 32-bit mode. Mountain Lion is not supported. If
    anybody has a solution for ML i would be very grateful for a comment.

    2,216 downloads

    2 comments

    Submitted

  18. I've edited the IO80211Family.ket with the ID of Broadcom 4312 NOT 4311 (pci14e4,4315) and now it's working. I've worked on it for 3 months!! I hope you enjoy this.

    BACKUP YOUR KEXTS BEFORE INSTALL IT.
    REPAIR YOUR PERMISSIONS AND REBOOT.

    http://i50.tinypic.com/n2mpnb.jpg

    Simone, Italia.

    8,875 downloads

    23 comments

    Submitted

  19. ???????? ?? ????? asus p5kpl-vm ???? ????????

    2,329 downloads

    0 comments

    Submitted

  20. Driver for Atheros? AR81(31/32/51/52/61/62/71/72) PCI-E ethernet.
    ALX defines for Linux to Mac compatibility.

    Copyright ? 2012 Hayley .
    All rights reserved.

    This program is free software; you can redistribute it and/or modify it
    under the terms of the GNU General Public License as published by the FreeSoftware Foundation; either version 2 of the License, or (at your option) any later version.

    This program is distributed in the hope that it will be useful, but WITHOUTANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.

    7,707 downloads

    13 comments

    Submitted

  21. Network - ????? ??? ??????

    2,629 downloads

    0 comments

    Submitted

  22. 168C:0013 Atheros AR5001X+ Wireless Network Adapter AR5212
    aka DWL-G650


    Enj0Y!


    THE HERO Mister http://www.osx86.net/members/rrtn.html

    his solution:

    this works in 10.8.4 if you use the /usr/libexec/airportd from 10.8.3!

    ThX a Bunch rrtn!

    3,094 downloads

    17 comments

    Submitted

  23. Atheros 9287: 4.0.72.0-P2P device id pci168c,2e Mountain Lion 10.8.5
    Locale and country fix you can edit info.plist in the DeviceMergeNub.kext.
    Or you use DSDT Code,with your Native IO80211Family.kext,good for OSX Install!
    Device (ARPT) { Name (_ADR, Zero) // _ADR: Address Name (_PRW, Package (0x02) // _PRW: Power Resources for Wake { 0x09, 0x04 }) Method (_DSM, 4, NotSerialized) // _DSM: Device-Specific Method { Store (Package (0x0E) { "name", "pci168c,30", "device-id", Unicode ("0"), "IOName", "pci168c,30", "revision-id", Buffer (0x04) { 0x01, 0x00, 0x00, 0x00 }, "subsystem-id", Buffer (0x04) { 0x9F, 0x00, 0x00, 0x00 }, "subsystem-vendor-id", Buffer (0x04) { 0x6B, 0x10, 0x00, 0x00 }, "vendor-id", Buffer (0x04) { 0x8C, 0x16, 0x00, 0x00 } }, Local0) DTGP (Arg0, Arg1, Arg2, Arg3, RefOf (Local0)) Return (Local0) } }
    Or you add this to FakeSMC info.plist.
    <key>Atheros Wireless LAN PCI</key> <dict> <key>CFBundleIdentifier</key> <string>com.apple.driver.AirPort.Atheros40</string> <key>IOClass</key> <string>AirPort_AtherosNewma40</string> <key>IOMatchCategory</key> <string>IODefaultMatchCategory</string> <key>IONameMatch</key> <array> <string>pci168c,2e</string> </array> <key>IOProbeScore</key> <integer>700</integer> <key>IOProviderClass</key> <string>IOPCIDevice</string> </dict>
    is up to you!
    Good Luck

    7,559 downloads

    23 comments

    Updated

  24. Slight change for BCM57781 ... but i must investigate the code more time ...
    The only thing i hate about is after an intese traffic it stops working. Have no clue how to fix it.
    I'll add more devices to the source and keep only one file in the download section ...


    } devices[] = {
    { DEVICEID_BCM5722, "BCM5722 NetXtreme Server Gigabit Ethernet" },
    { DEVICEID_BCM5754, "BCM5754 NetXtreme Gigabit Ethernet" },
    { DEVICEID_BCM5754M, "BCM5754M NetXtreme Gigabit Ethernet" },
    { DEVICEID_BCM5755, "BCM5755 NetXtreme Gigabit Ethernet" },
    { DEVICEID_BCM5755M, "BCM5755M NetXtreme Gigabit Ethernet" },
    { DEVICEID_BCM5787, "BCM5787 NetLink (TM) Gigabit Ethernet" },
    { DEVICEID_BCM5787M, "BCM5787M NetLink (TM) Gigabit Ethernet" },
    { DEVICEID_BCM5906, "BCM5906 NetLink (TM) Fast Ethernet" },
    { DEVICEID_BCM5906M, "BCM5906M NetLink (TM) Fast Ethernet" },
    { DEVICEID_BCM57788, "BCM57788 NetLink (TM) Gigabit Ethernet" },
    { DEVICEID_BCM5784M, "BCM5784M NetLink Gigabit Ethernet" },
    { DEVICEID_BCM5784, "BCM5784 NetLink Gigabit Ethernet" },
    { DEVICEID_BCM57785, "BCM57785 NetLink (TM) Gigabit Ethernet" },
    { DEVICEID_BCM57781, "BCM57781 NetLink (TM) Gigabit Ethernet" },
    { DEVICEID_BCM57780, "BCM57780 NetLink (TM) Gigabit Ethernet" },
    { 0, NULL }

    with the device ID as follow:


    #define DEVICEID_BCM5722 0x165A
    #define DEVICEID_BCM5754 0x167A
    #define DEVICEID_BCM5754M 0x1672
    #define DEVICEID_BCM5755 0x167B
    #define DEVICEID_BCM5755M 0x1673
    #define DEVICEID_BCM5787 0x169B
    #define DEVICEID_BCM5787M 0x1693
    #define DEVICEID_BCM5906 0x1712
    #define DEVICEID_BCM5906M 0x1713
    #define DEVICEID_BCM57788 0x1691
    #define DEVICEID_BCM5784M 0x1698
    #define DEVICEID_BCM5784 0x1698
    #define DEVICEID_BCM57785 0x16b5
    #define DEVICEID_BCM57781 0x16b1
    #define DEVICEID_BCM57780 0x1692

    Still loking for more stable release but for now i use the one attached. Just place it in the Plugins folder of IONetworkingFamily and "install" it using Kext Wizard or something.

    5,103 downloads

    27 comments

    Submitted

  25. Realtek RTL8101E / RTL8136 for Lion and Mountain Lion

    Works also with the following Realtek cards.

    RTL8111B/RTL8168B/RTL8111/RTL8168
    RTL8111C/RTL8111CP/RTL8111D(L)
    RTL8168C/RTL8111DP/RTL8111E
    RTL8168E/RTL8111F/RTL8411

    6,117 downloads

    10 comments

    Submitted