Thread: Mac won't detect USB receiver !!!

Do you mind if I ask a couple question ?
Is it possible to show AMD CPU temp and GPU temp on iStat? I have AMD Athlon II 240 Dual Core and Radeon HD 6570 1GB DDR3. When I install the Radeon Monitor, it just said Unknown or Unsupport chipset. I got my graphic card fully working but it appear as Radeon HD NI40, is there any way to make it to Radeon HD 6570 or Radeon HD 6000 ?

Originally Posted by vudothienan_1810

Do you mind if I ask a couple question ?
Is it possible to show AMD CPU temp and GPU temp on iStat? I have AMD Athlon II 240 Dual Core and Radeon HD 6570 1GB DDR3. When I install the Radeon Monitor, it just said Unknown or Unsupport chipset. I got my graphic card fully working but it appear as Radeon HD NI40, is there any way to make it to Radeon HD 6570 or Radeon HD 6000 ?

Honestly I don`t know about the Monitor Temps on AMD processors, but may be possible depending the way that your system reports the temps, I recommend that you take a good read at this thread > Monitoring With Fakesmc - Project OS X Forums

About your Graphic Card, if there`s no support for him, you can ask to the Developer on this thread to add the card by giving to him your card model, DeviceID and VendorID > Radeon Monitor - Project OS X Forums

Honestly I don`t know about the Monitor Temps on AMD processors, but may be possible depending the way that your system reports the temps, I recommend that you take a good read at this thread > Monitoring With Fakesmc - Project OS X Forums

About your Graphic Card, if there`s no support for him, you can ask to the Developer on this thread to add the card by giving to him your card model, DeviceID and VendorID > Radeon Monitor - Project OS X Forums

Thank you, I'll try that

Honestly I don`t know about the Monitor Temps on AMD processors, but may be possible depending the way that your system reports the temps, I recommend that you take a good read at this thread > Monitoring With Fakesmc - Project OS X Forums

About your Graphic Card, if there`s no support for him, you can ask to the Developer on this thread to add the card by giving to him your card model, DeviceID and VendorID > ......

I found a way to get graphic card work, I use Aticonfig=Bulrushes and Mac recognize it like its name but 1 problem is it only work on my TV which using HDMI. VGA and DVI will not work for some reason

Originally Posted by vudothienan_1810

I found a way to get graphic card work, I use Aticonfig=Bulrushes and Mac recognize it like its name but 1 problem is it only work on my TV which using HDMI. VGA and DVI will not work for some reason

Did you already tried a different frame buffer???

Use Chameleon Wizard, and try different frame buffers to see if you can get a better result....

Originally Posted by kyndder

Did you already tried a different frame buffer???

Use Chameleon Wizard, and try different frame buffers to see if you can get a better result....

I tried all the framebuffer but still no luck, but I found this topic on Tonymacx86 that talk about the same graphic card. Can you take a look of that topic ? https://tonymacx86.com/viewtopic.php...38058&start=30,
I found my framebuffer using this topic: tonymacx86 Forum • Information
That guy got his graphic card work using Aticonfig=Muskgrass and if I'm using the same config as him, my card would not work. With the DSDT part, I quite not understand how to add to the DSDT
Here is my little info and hope it can help

Code:

vudothienan-pc:~ vudothienan$ ioreg | grep ATY
    | |   |     +-o ATY,Bulrushes@0  <class AtiFbStub, id 0x1000002f0, register$
    | |   |     +-o ATY,Bulrushes@1  <class AtiFbStub, id 0x1000002f1, register$
    | |   |     +-o ATY,Bulrushes@2  <class AtiFbStub, id 0x1000002f2, register$

And this is my DSDT: http://www.mediafire.com/?dv1y7of72278tyj

Originally Posted by vudothienan_1810

PHP Code:

vudothienan-pc:~ vudothienan$ ioreg | grep ATY
    | |   |     +-o ATY,Bulrushes@0  <class AtiFbStub, id 0x1000002f0, register$
    | |   |     +-o ATY,Bulrushes@1  <class AtiFbStub, id 0x1000002f1, register$
    | |   |     +-o ATY,Bulrushes@2  <class AtiFbStub, id 0x1000002f2, register$ 


Tell all your hardware specs (processor, machine model, etc)...

Originally Posted by kyndder

Tell all your hardware specs (processor, machine model, etc)...

Here is my spec:
HP Pavilion a4327
Processor: AMD Athlon II 240 Dual Core 2.8Ghz
Ram: 4GB DDR2
Lan: NVIDIA nForce 10/100 Mbps (Realtek RTL8201CL/CP)
Sound: High Definition Audio Controller (Realtek ALC888/1200)
Graphic: ATI Radeon HD 6570 1GB DDR3
If you need anything else please let me know

Originally Posted by vudothienan_1810

Here is my spec:
HP Pavilion a4327
Processor: AMD Athlon II 240 Dual Core 2.8Ghz
Ram: 4GB DDR2
Lan: NVIDIA nForce 10/100 Mbps (Realtek RTL8201CL/CP)
Sound: High Definition Audio Controller (Realtek ALC888/1200)
Graphic: ATI Radeon HD 6570 1GB DDR3
If you need anything else please let me know

Use this app, save a report and send-me > IORegistryExplorer - Downloads - OSx86.net

Here you go: Vudothienan's Mac.ioreg