Thread: native AICPUPM on ASUS X53SV-SX58V

Hi all, I have ASUS x53sv-sx598v (i7 2670QM,Geforce 540M + Intel HD3000, 6GB, Intel N-Centrino, alc 269) running almost perfectly 10.7.3 installed with Unibeast + Multibeast method (easybeast mode, with NULLCPUPM). What I can't in no way achieve is to enable native ACIPUPM, even with patched DSDT, even with speedstepper. Does anyone of you know how to?...or better,had success with this?

Originally Posted by kissandtell

Hi all, I have ASUS x53sv-sx598v (i7 2670QM,Geforce 540M + Intel HD3000, 6GB, Intel N-Centrino, alc 269) running almost perfectly 10.7.3 installed with Unibeast + Multibeast method (easybeast mode, with NULLCPUPM). What I can't in no way achieve is to enable native ACIPUPM, even with patched DSDT, even with speedstepper. Does anyone of you know how to?...or better,had success with this?

Hy budy!

You need SpeedStepper > SpeedStepper - InsanelyMac Forum

Originally Posted by kyndder

Hy budy!

You need SpeedStepper > SpeedStepper - InsanelyMac Forum

Hi Kyndder, don't you remember me? You already helped me to compile my DSDT, but even with that + speedstepper I could not run my system without NullCPUPM for KP. Now I've found that the compiled and patched DSDT had HPET "_RCS Not serialized", but even running HPET patch DSDT Editor could not fix an error (2908 Error Object does not exist (ATT3)) and then save a patched DSDT. For what I see in speedstepper thread there's still the chance to mess with SSDT, but I really don't know how to begin, do you have at least an hypotesis?

I remember you!

Originally Posted by kissandtell

Now I've found that the compiled and patched DSDT had HPET "_RCS Not serialized", but even running HPET patch DSDT Editor could not fix an error (2908 Error Object does not exist (ATT3)) and then save a patched DSDT.

You need to check if you are using the right HPET patch for your MOBO....

Before apply the patch using DSDT Editor, preview the changes to see if you are using the right one...
Yeah!!

Originally Posted by kissandtell

For what I see in speedstepper thread there's still the chance to mess with SSDT, but I really don't know how to begin, do you have at least an hypotesis?

SSDT patches are even more difficult to made than basic DSDT patches...

Unfortunately, I don`t have any experience on this kind of patch...

I will take a better look at the SpeedStepper thread to check if I can help you better...

Originally Posted by kyndder

You need to check if you are using the right HPET patch for your MOBO....

Before apply the patch using DSDT Editor, preview the changes to see if you are using the right one...
Yeah!!

I applied the only HPET patch (i think it's generic) that is in the patch folder that comes with DSDT editor. Actually I tried even to apply HPET and NEW HPET patches together, and it fixed all errors but still showed warnings, but I got KP as well.Last hypothesis: I use multibeast post-install method and it patches AppleRTC too, may it causes my KP?

Originally Posted by kissandtell

I applied the only HPET patch (i think it's generic) that is in the patch folder that comes with DSDT editor. Actually I tried even to apply HPET and NEW HPET patches together, and it fixed all errors but still showed warnings, but I got KP as well.Last hypothesis: I use multibeast post-install method and it patches AppleRTC too, may it causes my KP?

No...

I believe that`s not the point...

If you already patched your AICPUPM kext and still getting KP, maybe only the SSDT tables may fix your issue...

BTW, did you already tried this?? > DSDT for Asus P8P67-M PRO - InsanelyMac Forum

Originally Posted by kyndder

No...

I believe that`s not the point...

If you already patched your AICPUPM kext and still getting KP, maybe only the SSDT tables may fix your issue...

BTW, did you already tried this?? > DSDT for Asus P8P67-M PRO - InsanelyMac Forum

I took a look to that thread but it's a bit difficult for me to understand what I should practically do; the guy that posted that thread attached many files (specific for his MOBO I suppose), which ones should I try to use, and how?

Originally Posted by kissandtell

I took a look to that thread but it's a bit difficult for me to understand what I should practically do; the guy that posted that thread attached many files (specific for his MOBO I suppose), which ones should I try to use, and how?

Boot your machine without DSDT...

Download ssdt_pr.dsl from the first post and use this app to compile > DSDT disass+compile: newer IASL=less compile errors+more opti - InsanelyMac Forum

Rename the generated "ssdt_pr.aml" file to "ssdt-n.aml" and put it inside of your /Extra folder...

Patch AICPUPM if you don`t made yet using SpeedStepper...

Review your DSDT to check if you get no errors compiling...

Remove NullCPU, reboot...

Boot up using the flag`s -f -v and crossed fingers...

Originally Posted by kyndder

Boot your machine without DSDT...

Download ssdt_pr.dsl from the first post and use this app to compile > DSDT disass+compile: newer IASL=less compile errors+more opti - InsanelyMac Forum

Rename the generated "ssdt_pr.aml" file to "ssdt-n.aml" and put it inside of your /Extra folder...

Patch AICPUPM if you don`t made yet using SpeedStepper...

Review your DSDT to check if you get no errors compiling...

Remove NullCPU, reboot...

Boot up using the flag`s -f -v and crossed fingers...

2012-02-09 01.35.31.jpg

Originally Posted by kissandtell

2012-02-09 01.35.31.jpg

.....

We need read a bit more about it...