Jump to content


Always up to date!

Do you want to be kept up to date with new versions of files and / or news? Follow us on Twitter and Facebook! Make sure you are updated with new file versions!

Photo

RTC: only single RAM bank(128 bytes) error in vaio vpceb44en installing niresh 10.7.3

- - - - -

  • Please log in to reply
20 replies to this topic

#1
nirmal_niks7

nirmal_niks7

    Member

  • Members
  • PipPip
  • 34 posts
when i boot with dvd using -f -v flag ,got stuck in [PCI configuration begin],
then booted with npci=0x2000 -f -v,then stuck in

[PCI configuration begin]
RTC: only single RAM bank(128 bytes)

is it having any solution.
in this 10.7.3 my graphics card is identified.
pls suggest me .....
Processor-intel i3-380M @2.53 GHz
Motherboard-sony vaio VPCEB44EN
MotherboardChipset-intel ibex peak -M HM55,Intel ironlake-M
Graphics-ati hd radeon 5470 512mb
Audio-Realtek ALC269
Ram-3gb ddr3
Network-atheros AR9285 & Marvell 88E8059 Ethernet
HDD-320gb
Bluetooth-broadcom BCM2070
Bios-American Megatrends R1170Y8
OS-Dual boot Win 7 Prof/Mac Lion 10.7.3 (11D50)

#2
kyndder

kyndder

    OSx86.net Crew

  • Supervisors
  • 9,585 posts
Did you tried this??? > PCI Configuration Begin Fix - Downloads - OSx86.net

579868.png

Asus P8Z77-V LK Firmware 1001 / Core i5-2300 Sandy Bridge / Geekbench


#3
nirmal_niks7

nirmal_niks7

    Member

  • Members
  • PipPip
  • 34 posts
i am booting through dvd its not possible to apply the kexts..........but it passes the pci config error it stucks on
RTC: only single RAM bank(128 bytes) which comes after [PCI configuration begin].
Processor-intel i3-380M @2.53 GHz
Motherboard-sony vaio VPCEB44EN
MotherboardChipset-intel ibex peak -M HM55,Intel ironlake-M
Graphics-ati hd radeon 5470 512mb
Audio-Realtek ALC269
Ram-3gb ddr3
Network-atheros AR9285 & Marvell 88E8059 Ethernet
HDD-320gb
Bluetooth-broadcom BCM2070
Bios-American Megatrends R1170Y8
OS-Dual boot Win 7 Prof/Mac Lion 10.7.3 (11D50)

#4
kyndder

kyndder

    OSx86.net Crew

  • Supervisors
  • 9,585 posts
Try using the flag`s below...

cpus=1 busratio=19 -x -v

579868.png

Asus P8Z77-V LK Firmware 1001 / Core i5-2300 Sandy Bridge / Geekbench


#5
nirmal_niks7

nirmal_niks7

    Member

  • Members
  • PipPip
  • 34 posts
i tried this flag too but stucks on [PCI configuration begin]. and when using npci=0x2000 stucks on RTC: only single RAM bank(128 bytes)..which comes after [PCI configuration begin].
Processor-intel i3-380M @2.53 GHz
Motherboard-sony vaio VPCEB44EN
MotherboardChipset-intel ibex peak -M HM55,Intel ironlake-M
Graphics-ati hd radeon 5470 512mb
Audio-Realtek ALC269
Ram-3gb ddr3
Network-atheros AR9285 & Marvell 88E8059 Ethernet
HDD-320gb
Bluetooth-broadcom BCM2070
Bios-American Megatrends R1170Y8
OS-Dual boot Win 7 Prof/Mac Lion 10.7.3 (11D50)

#6
kyndder

kyndder

    OSx86.net Crew

  • Supervisors
  • 9,585 posts

i tried this flag too but stucks on [PCI configuration begin]. and when using npci=0x2000 stucks on RTC: only single RAM bank(128 bytes)..which comes after [PCI configuration begin].


You meant when using the flag`s below???

cpus=1 busratio=19 npci=0x2000 -x -v

If yes, you will need to made your own installer...

579868.png

Asus P8Z77-V LK Firmware 1001 / Core i5-2300 Sandy Bridge / Geekbench


#7
nirmal_niks7

nirmal_niks7

    Member

  • Members
  • PipPip
  • 34 posts
i tried npci=0x2000 -f -v and cpus=1 busratio=19 npci=0x2000 -f -v.
both stuck on RTC: only single RAM bank(128 bytes)..
currently not any os x installed in my laptop so i cant build my own installer.......
Processor-intel i3-380M @2.53 GHz
Motherboard-sony vaio VPCEB44EN
MotherboardChipset-intel ibex peak -M HM55,Intel ironlake-M
Graphics-ati hd radeon 5470 512mb
Audio-Realtek ALC269
Ram-3gb ddr3
Network-atheros AR9285 & Marvell 88E8059 Ethernet
HDD-320gb
Bluetooth-broadcom BCM2070
Bios-American Megatrends R1170Y8
OS-Dual boot Win 7 Prof/Mac Lion 10.7.3 (11D50)

#8
kyndder

kyndder

    OSx86.net Crew

  • Supervisors
  • 9,585 posts

i tried npci=0x2000 -f -v and cpus=1 busratio=19 npci=0x2000 -f -v.
both stuck on RTC: only single RAM bank(128 bytes)..
currently not any os x installed in my laptop so i cant build my own installer.......


Unfortunately, you need the 10.7 installer...

579868.png

Asus P8Z77-V LK Firmware 1001 / Core i5-2300 Sandy Bridge / Geekbench


#9
nirmal_niks7

nirmal_niks7

    Member

  • Members
  • PipPip
  • 34 posts
thanks i will try to make it installing 10.6.6
Processor-intel i3-380M @2.53 GHz
Motherboard-sony vaio VPCEB44EN
MotherboardChipset-intel ibex peak -M HM55,Intel ironlake-M
Graphics-ati hd radeon 5470 512mb
Audio-Realtek ALC269
Ram-3gb ddr3
Network-atheros AR9285 & Marvell 88E8059 Ethernet
HDD-320gb
Bluetooth-broadcom BCM2070
Bios-American Megatrends R1170Y8
OS-Dual boot Win 7 Prof/Mac Lion 10.7.3 (11D50)

#10
kyndder

kyndder

    OSx86.net Crew

  • Supervisors
  • 9,585 posts

thanks i will try to make it installing 10.6.6


:encouragement:

579868.png

Asus P8Z77-V LK Firmware 1001 / Core i5-2300 Sandy Bridge / Geekbench


#11
smilee

smilee

    Donator

  • Donators
  • PipPipPip
  • 101 posts
for IATKOS 10.7.3 I needed to boot -v busratio=17 pci=acpi then it does not stop after loading PCI
Laptop:
IATKOS L2 10.7.5 Lenovo G560 i3-350m nVidia GT218 [GeForce 310m]
Intel 5 Series/3400 Chipset, 82801 PCI Bridge, LAN: RTL80101E, Wlan: Broadcom BCM43225

PCs IAtkos L2 & IAtkos ML 2 10.8.2
10.7.5 & 10.8.2 GA-P67X-UD3-B3 i7-2600 or i5-2400 GTX 650 Ti or GT 9600
10.8.2 GA-H77-D3H and GA-Z77X-D3H also ASUS P8Z77-M GTX650, GTX 650ti, GTX660
(GTX660 has same Cinebech as GTX650ti - do not waste money)

#12
nirmal_niks7

nirmal_niks7

    Member

  • Members
  • PipPip
  • 34 posts
thanks @smilee used pci=acpi -x -v but it stuck on "console 1024x768 @ 0xe0000000" which comes after pci config begin.

@kyndder when used GraphicsEnabler=No -x -v and GraphicsEnabler=No npci=0x2000 -x -v got stuck in the same, as image attached.
Posted Image

Edited by nirmal_niks7, 25 February 2012 - 11:33 AM.

Processor-intel i3-380M @2.53 GHz
Motherboard-sony vaio VPCEB44EN
MotherboardChipset-intel ibex peak -M HM55,Intel ironlake-M
Graphics-ati hd radeon 5470 512mb
Audio-Realtek ALC269
Ram-3gb ddr3
Network-atheros AR9285 & Marvell 88E8059 Ethernet
HDD-320gb
Bluetooth-broadcom BCM2070
Bios-American Megatrends R1170Y8
OS-Dual boot Win 7 Prof/Mac Lion 10.7.3 (11D50)

#13
kyndder

kyndder

    OSx86.net Crew

  • Supervisors
  • 9,585 posts

thanks @smilee used pci=acpi -x -v but it stuck on "console 1024x768 @ 0xe0000000" which comes after pci config begin.

@kyndder when used GraphicsEnabler=No -x -v and GraphicsEnabler=No npci=0x2000 -x -v got stuck in the same, as image attached.
Posted Image


Don`t use busratio=17, the correct Bus/COre Ratio value for your processor is 19 > IntelĀ® Core

Did you already tried with the flag`s below???

cpus=1 busratio=19 npci=0x2000 -x -v

579868.png

Asus P8Z77-V LK Firmware 1001 / Core i5-2300 Sandy Bridge / Geekbench


#14
nirmal_niks7

nirmal_niks7

    Member

  • Members
  • PipPip
  • 34 posts
i used 19 not 17
Processor-intel i3-380M @2.53 GHz
Motherboard-sony vaio VPCEB44EN
MotherboardChipset-intel ibex peak -M HM55,Intel ironlake-M
Graphics-ati hd radeon 5470 512mb
Audio-Realtek ALC269
Ram-3gb ddr3
Network-atheros AR9285 & Marvell 88E8059 Ethernet
HDD-320gb
Bluetooth-broadcom BCM2070
Bios-American Megatrends R1170Y8
OS-Dual boot Win 7 Prof/Mac Lion 10.7.3 (11D50)

#15
kyndder

kyndder

    OSx86.net Crew

  • Supervisors
  • 9,585 posts

i used 19 not 17


You take a look at your basic BIOS settings???

SATA = AHCI
Suspend Mode = Only S3
HPET = Enabled
Speedstep (EIST) = Enabled

If yes and everything matches, maybe there`s something wrong with your installer...

Or with the FakeSMC compiled by Niresh12495... :devilish:

Buddy... I don`t know if this installer is trustable....

579868.png

Asus P8Z77-V LK Firmware 1001 / Core i5-2300 Sandy Bridge / Geekbench


#16
nirmal_niks7

nirmal_niks7

    Member

  • Members
  • PipPip
  • 34 posts
i dont have those such settings in bios......by default during boot its taking s3 state........
Processor-intel i3-380M @2.53 GHz
Motherboard-sony vaio VPCEB44EN
MotherboardChipset-intel ibex peak -M HM55,Intel ironlake-M
Graphics-ati hd radeon 5470 512mb
Audio-Realtek ALC269
Ram-3gb ddr3
Network-atheros AR9285 & Marvell 88E8059 Ethernet
HDD-320gb
Bluetooth-broadcom BCM2070
Bios-American Megatrends R1170Y8
OS-Dual boot Win 7 Prof/Mac Lion 10.7.3 (11D50)

#17
kyndder

kyndder

    OSx86.net Crew

  • Supervisors
  • 9,585 posts

i dont have those such settings in bios......by default during boot its taking s3 state........


Unfortunately, I believe that you must try with a different installation method, preferably Retail...

579868.png

Asus P8Z77-V LK Firmware 1001 / Core i5-2300 Sandy Bridge / Geekbench


#18
nirmal_niks7

nirmal_niks7

    Member

  • Members
  • PipPip
  • 34 posts
thanks i willl..
Processor-intel i3-380M @2.53 GHz
Motherboard-sony vaio VPCEB44EN
MotherboardChipset-intel ibex peak -M HM55,Intel ironlake-M
Graphics-ati hd radeon 5470 512mb
Audio-Realtek ALC269
Ram-3gb ddr3
Network-atheros AR9285 & Marvell 88E8059 Ethernet
HDD-320gb
Bluetooth-broadcom BCM2070
Bios-American Megatrends R1170Y8
OS-Dual boot Win 7 Prof/Mac Lion 10.7.3 (11D50)

#19
aindurti

aindurti

    Junior Member

  • Members
  • Pip
  • 6 posts

Don`t use busratio=17, the correct Bus/COre Ratio value for your processor is 19 > IntelĀ® Core

Did you already tried with the flag`s below???

cpus=1 busratio=19 npci=0x2000 -x -v


Hey guys, I used this flag and it booted up. How do i get it so i don't have to use the flag every time?

#20
noname

noname

    OSx86.net Crew

  • Super Moderators
  • 2,157 posts
Add these lines to org.chameleon.boot.plist:

<key>Kernel Flags</key>
<string>cpus=1 busratio=13 npci=0x2000 -x -v</string>

Compaq CQ58        | i3-2328M CPU @ 2.20 GHz | Intel HD Graphics 3000 | 4 GB 1600 MHz DDR3 | Clover - > Mavericks - 10.9.2

Acer Aspire E1-571 | i7-3632QM CPU @ 2.20GHz | Intel HD Graphics 4000 |  8 GB 1333 MHz DDR3 | Clover -> Mavericks 10.9.2

 

USE SEARCH before starting a new thread





0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users