|
Version
Compatible with
Downloads
|
10.6.5 legacy kernel for INTEL/AMD V2 (32+64bit) | Size: 4.63 MB |
10.6.5 legacy kernel for INTEL/AMD V2 (32+64bit)
- Supports everything V1 supports
+ VMWare fix + mac model override fix (credits go to Nawcom)
all credits to andyvand
Comments
|
tylerk36
29th November 2010 at 07:17
|
How do you install this when you have the target drive mounted on a real mac? |
|
Rupke
29th November 2010 at 09:11
|
Does this have any advantages if vanilla kernel works ok?? |
|
moustacheaa
2nd December 2010 at 16:30
|
downloading this cross half earth is killing me... 339B/s |
|
asoce
3rd December 2010 at 08:32
|
Downloading! What would happen? |
|
davem2008
11th December 2010 at 01:41
|
Dowloaded and installed on AMD! Works great so far... |
|
NicoX
11th December 2010 at 08:01
|
@devem2008 Can you tell me how did you install the kext? I double click on the unzipped file it opens terminal NicoX |
|
davem2008
15th December 2010 at 00:33
|
NicoX: If you are not comfortable using the Terminal, then it can be a chore to install the new kernel. Also, if you are afraid of losing anything that you have installed under OSX then I suggest you get someone else to help you first. I have two harddisk drives so I can copy my important stuff from one to another before I try anything that might cause the system to not boot. OK...You have been warned. This could cause your system to not boot...so, use it at your own risk! The new kernel needs to be copied into the root of your boot diskdrive. I usually do this by using the Terminal and signing in as the root user. After the kernel is copied to the root directory of your boot disk, you need to make sure the permissions are correct. If you don't know what I am telling you then you probably need to get someone with a little more experience to help you. (Google is your best friend...) |
|
Krishna21
29th December 2010 at 17:02
|
Worked perfectly on my 630i machine I had OS X 10.6.0 running with mach_kernel, downloaded and ran 10.6.5 Combo, didn't reboot when finished, replaced current mach kernel with this one, rebooted, drank soda, and we're all good  Thank you! |
|
610110707
30th December 2010 at 16:47
|
Thank you very good don't know HD5650 video card driver when can you come out |
|
tan7757
31st December 2010 at 12:42
|
Thank you! |
|
biang
7th January 2011 at 00:12
|
thanks |
|
lycheebill
7th January 2011 at 14:02
|
Weehee~~Tested this kernel, works great on AMD k10.5. Most programs i have runs smoothly with this kernel, only problem i had was Melodyne Studio and Virtualbox. Melodyne simply wont run (M editor will tho), and Virtualbox gives a instant restart if I try to use amd-vm service. Good work guys, very much appreciated. |
|
djtito2np
7th January 2011 at 18:49
|
I have an i3 with 4 gb ran. gigabyte motherboard GA-G31M-S2L. everything works well, is a rocket, but the USB are causing problems, I think that is the kernel. and the 10.6.6 update came out, the kernel of this vercion have to work it better. I'm still in the struggle for perfection. Greetings |
|
djtito2np
7th January 2011 at 18:50
|
help....... |
|
dimonvin
10th January 2011 at 15:05
|
Just replace the kernel you are using. |