By guestFakeSMC The Mandatory (Very Important) Kext to Run OS X On Your Computer.
Please Rate The File.
Here are the files for the Fully working Asmedia USB 3.0 Controller (1042) in Mac OSX 10.7.3. I have tested this with my Notebook Asus K53SC. It can work in other Version of Mac OSX as well but I haven't checked, so give a try.
Everything works Sleep and shutdown but I haven't checked the performance with USB 3.0 devices since I don't have any USB3.0 devices but I'm sure it will work since the drivers are made for this chip itself.
For shutdown and Sleep to work, it needs a DSDT fix.
Here is the DSDT fix and steps for everyone who has Asmedia 1042 USB 3.0 Controller to try it.
1. First, find where your device is connected by looking at the IORegistry using IORegistryExplorer app.
Example:- Mine was connected to PCI0->RP04->PXSX
2. Add the Following method to PXSX
Method (_DSM, 4, NotSerialized)
Store (Package (0x0A)
"ASMedia XHCI Controller"
"ASMedia ASM1042 USB 3.0 xHCI Controller"
DTGP (Arg0, Arg1, Arg2, Arg3, RefOf (Local0))
3. Install the Kext attached and fix permissions
You can update your firmware to latest version using the File (Firmware_Upd) attached.
For me everything working in this and as well as before firmwaresl.
UPDATE: Added the New and Fixed Kexts for Both Lion and Mountain Lion.
Hope it helps.
My previous Files for the K53SC Notebook if somebody wants:
DSDT and SSDT Fixes :
Complete Package and Guide :
Atheros AR5B195(AR9285+AR3011) Wifi and Bluetooth Package Only:
This kext inject id device for Sata chip :
Install via Kext Wizard repair permissions/cache
Kext by Fabio1971, updated the work of ErmaC eep357 and Micky1979
By amzorHere you can find the AppleIntelPIIXATA kext driver for Intel ICHx chipsets.(ICH0 to 8, 9 and 10)
All your sata ports should now work correctly. No more need of the old AppleVIAATA kext.
This has been tested and is know to work on the Asus P5K, P5K-E and Asus P5K Premium.
It should work with all mobos ICH based : 965 DS3, P5B, P5K-SE, P5K-VM, P5K pro etc etc.
Drive(s) are UDMA enabled, and fully working without i/o errors and this even with more than 3GB.
AppleVIAATA should be removed or at least IChx ID inside of it to avoid conflicts.(In case your AppleViaAta handle other hardware than IChx: Marvell IDE for exemple)
This fix works as well in IDE Enhanced Mode or in IDE Compatible Mode.
Here is the IOATAFamily kext with the new AppleIntelPIIXATA embedded in its plugin folder
By ninos22This is a installation pack for motherboard ASUS P5K and contains kexts for:
All of the above have been tested and confirmed and not need any configuration.
For: OS X Mavericks 10.9 (13A603) & Mountain Lion
Αυτό είναι ενα πακέτο εγκατάστασης για την μητ?ική ASUS P5K και πε?ιλαμβάνει οδηγο?ς για:
Ολα τα πα?απάνω έχουν δοκιμαστεί και επιβεβαιωθεί και δεν χ?ειάζονται καμιά πα?αμετ?οποίηση.
Για: OS X Mavericks 10.9 (13A603) & Mountain Lion
By MoorreGenericUSBXHCI.kext is a simpliest way to have a working third-party USB 3.0 chips, also including Intel's native
Кек?т GenericUSBXHCI - ?то ?амый про?той ?по?об включить в ?и?теме USB 3.0 чипы ?торонних производителей чип?ета, также как и родные от Интела.
By ReneInstall with Kext Utility or Kext Wizard in /System/Library/Extensions
Remember to unmount all USB3 drives before booting.
LaCie 1.0.8 driver patched by modbin.
The DP3 files from JohnJCash, you need it for Mountain Lion
If this doesn't work try version 1.0.10: http://www.osx86.net/view/3187-pxhcd.kext.html
By crusherNew product of RehabMan from all version Hackintosh.
By grisnoHi people,
This is a preliminary Mac OS driver installer for laptop HP Pavilion G6-2209SS with support for dual boot Bootloader. Maybe it can be installed on other HP Pavillion G6 series laptops, but in some cases additional fixes will have to be made.
I want to thank the whole community for their efforts and content provided, because without these it would not be possible to create this installer.
I would appreciate comments and suggestions!!
CPU : OK Intel Core i3-2370M
AUDIO : OK IDT 92HD87B2/4 (111d:76d9) Layer 3 & 12 (Speakers+Hearphones+LineIn+MicInt w/NoiseFilter+MicExt+HDMI)
VIDEO : OK Intel HD Graphics 3000 (8086:0116) (LVDS + HDMI A/V + VGA)
MEMORY : OK Intel 2nd Generation Core Proccesor DRAM Controller (8086:0104) (Dual Channel DDR3 Up To 16GB)
SATA : OK Intel 7 Series Chipset Family SATA Controller (8086:1e03) (ACHI Mode)
DVD : OK (Read & Write)
USB 2.0 : OK Intel 7/C216 Chipset Family USB Enhaced Host Controller (8086:1e26 & 8086:1e2d)
USB 3.0 : OK Intel 7/C216 Chipset Family USB xHCI Host Controller (08086:1e31) ****
WEBCAM : OK HP TrueVision HD (SuYin) (064e:e263) [USB 2.0]
KEYBOARD : OK PS/2
TRACKPAD : OK PS/2 Synaptics
LAN : OK Realtek RTL8501E Fast/Gigabyte Ethernet Controller PCI Express (10ec:103c) *
AIRPORT : KO MediaTek RT3290 PCI Express (1814:3290) (Not Supported)
BLUETOOTH : KO MediaTek RT3290 PCI Express (1814:3298) (Not Supported)
CREADER : OK Realtek RTS5229 PCI Express (10ec:5229) (10.12.5+) ***
ACPI BAT : OK (Chameleon & Clover)
ACPI PWR : OK (Chameleon & Clover)
ACPI RST : OK (Chameleon & Clover)
ACPI SLP : OK (Chameleon & Clover) **
ACPI WAK : OK (Chameleon & Clover) **
HIBERNATE : OK (Only Clover Bootloader w/Hibernatemode: 7, 21 & 29)
IMESSAGE : OK (Chameleon & Clover)
FACETIME : OK (Chameleon & Clover)
ICLOUD : OK (Chameleon & Clover)
APPSTORE : OK (Chameleon & Clover)
ITUNES : OK (A/V DRM Content & Sync iPod/iPhone)
SIRI : OK
CMOS : OK
RTC : OK
LPC : OK Intel HM76 Express LPC Controller (8086:1e44)
SMBUS : OK Intel 7/C216 Chipset Family SMBus Controller (8086:1e22)
IMEI : OK Intel 7/C216 Chipset Family MEI Controller (8086:131a)
- AppleRTL8169Ethernet: phyWaitForAutoNegotiation TIMEOUT. *
- AppleRTL8169Ethernet: only work to 10Mbits. *
- You can't wake up the system when the laptop uses the battery and the system disk is a USB hard drive. **
- You can't wake up the system from PS/2 Keyboard/Trackpad. **
- The Wifi MediaTek RT3290 (1814:3290) device are not supported.
- The Bluetooth MediaTek RT3290 (1814:3298) device are not supported.
- The PCIe CardReader Realtek RTS5229 (10ec:5229) device are not supported. *** (10.12.5-)
- Stop working when sleep with inserted card. *** (10.12.5+)
- Show as internal when connect USB 3.0 hard disk device en in USB 2.0 port. **** (10.12+)
- Support Mac OS High Sierra
- Create unified installer for all Mac OS versions
- Remove all patched kexts of installer
- Manual: How To Install Wifi Card Blacklisted In HP UEFI BIOS
- Manual: How To Install OSX Without Destroying Windows 8.x Partition
By orgixmh#TARGET OS: MAVERICKS 10.9.0!
#TARGET LAPTOP: ACER ASPIRE 4741G (I5 430M, NVIDIA GT 330M)
#PACK/DSDT AUTHOR: KONSTANTINOS NIKAS
#HARDWARE UPGRADES NEEDED FOR BETTER PERFORMANCE/FEEL:
1) SSD Disk
2) Add more 2GB RAM
3) Modded backlit keyboard (http://forum.notebookreview.com/acer/491169-acer-timelinex-3820tg-backlit-keyboard-mod.html)
#WORKING (EVERY PART)
- Sound (Headphones jack auto switch, microphone needs a noise fix) [Kext Patch/DSDT]
- Wifi [Native]
- Ethernet [Kext]
- Sound [Kext Patch]
- Sleep [Native/DSDT]
- Temps (Cores, GPU, External1, 2) [Kext]
- Native Power Management [Native/DSDT]
- Speedstep [Native/DSDT/SSDT]
- Turbo Boost [Native]
- Camera (needs camtwist) [Native/Application]
- Card reader [Native]
- Graphics [Native/Install Cuda for better performance]
+ HDMI (No Sound needs patch) [DSDT/Native] - [Pathed 11.DEC.13]
- Battery indicator [Kext Patch/DSDT]
- Trackpad (tap to click, double tap to drug, scroller) [Kext Patch]
+ Trackpad Voodoo option (tap to click, double tap to drug, scroller, 2 finger scrolling) [Kext]
***(Voodoo PS2 Kext: Doesnt woking good enough as apples one but enables 2 finger scroling)
*** Update your laptop with latest bios and choose AHCI mode in bios settings.
*** Camera FIX:
first search on google for camtwist (appication), download app, run it
double click to your camera, save profile, select yourt profile and click
auto load, exit.
Every time you want your camera to work open your desired app (like skype,
photobooth or what ever) and then open camtwist and magicaly your camera works
-Voodoo Drivers FREE Pack
-DSDT patched (many many fixes)
-Native Power Management
-SSDT for Speedstep
-100% Working sleep
-Every part exept camera and mic (i will fix it in next upload) working really good.
#Extensions Folder (Use kext helper to install extensions and Repair Permissions)
ACPIBatteryManager.kext (Patched for battery indicator)
AppleSmartBatteryManager.kext (Patched for battery indicator)
AppleACPIPlatform.kext (Patched fir battery indicator)
AppleACPIPS2Nub.kext (Patched for Trackpad)
ApplePS2Controller.kext (Patched for trackpad)
BCM5722D.kext (Enables the ethernet card)
AppleHDA.kext (Enables the ALC279 sound card)
AppleRTC.kext (Patched RTC for CMOS reset bug)
EAPDFix.kext (Configured to sending “Enable Pulse?? after wakeup to EAPD Amplifier on ALC Device)
FakeSMC.kext (Emulates SMC device of a real MAC and sending values from system to os- Without this no hack possible)
VoodooPS2Controller.kext (Enables the trackpad)
VoodooPS2synapticsPane.prefPane (Voodoo Preferences pane)
VoodooPS2Daemon (Enabling trackpad after wake from sleep)
synapticsconfigload (Loading the configuration)
org.rehabman.voodoo.driver.Daemon.plist (Loading Daemon when mac starts)
org.voodoo.driver.synapticsconfigload.plist (Loading Daemon when mac starts)
#Boot Folder (If you have GUID partition table you must copy contents of folder to your EFI partition, if you have MBR you must copy to your boot partition )
Extra/dstd.aml (Many fixes for laptop)
Extra/ssdt.aml (Speedstep: 10 Steps for CPU)
Extra/org.chameleon.Boot.plist (Preconfigured for 4741g, Dont touch it)
Extra/smbios.plist (MacBook Pro 6,1)
Extra/modules/FileNVRAM.dylib (Enables iMessage)
1) Just use classic myHack method (no special kext needs for installation and 1st boot)
2) Install Kexts to /System/Library/Extensions with you fav kext installer
3) After first boot copy extra folder contents to your /Extra folder
4) Thats it, rebuild kernel cache and reboot.
5) You are welcome
#Voodoo PS2 Optional Pack Instalation Guide
1) Extract files to desktop
2) Install VoodooPS2Controller.kext with kext helper
3) open terminal and execute the following commands:
cd ~/Desktopsudo cp synapticsconfigload /usr/binsudo cp VoodooPS2Daemon /usr/binsudo cp org.voodoo.driver.synapticsconfigload.plist /Library/LaunchDaemonssudo cp org.voodoo.driver.synapticsconfigload.plist /Library/LaunchDaemons
4) Backup and remove following kexts from /System/Library/Extensions:
5) Repair Permissions and Rebuild Cache
#LAST UPDATE: 11.DEC.2013
By crusherThis version is mainly based on Yosemite Developer Preview and Beta.I hope to work and on Gold Master version Yosemite.Original post Zenith432
By neo_fox33Install with Kext Utility or Kext Wizard in /System/Library/Extensions
LaCie 1.0.10 driver patched try to replicate modbin method.
Tested On x58a-ud3r Rev 2.
By DmosThis will fix Still Waiting for root device problem.It helpfull for Older(all) & newer(some) MB`s
If Installer(usb)or HDD (post installation ) can`t detect HDD or in Disk utility copy kext into Extra or S/L/E.
reuild cache & repair permission HDD or USB.
By PaulOSXDue to may Dell M1530, which the GPU has burned I was in search for an hackintosh replacement.
This Asus N56VM performs well also after some tweakes and searching the web. I found this website:
Which provide all the necessary information about running OSX 10.8.1 ;-) thanks to marklangovoi / M-dudarev who did a lot of research!
My ASUS is running very well, 2hours on full battery!
IMPORTANT; use an MBR harddisk configuration instead of GPT! otherwise the HDD or SSD won't be recognized by the BIOS! use 2 partition by dual boot, first OSX, 2nd Windows 7.
- Intel HD 4000 Q/E full HD 1920 x 1080
- Wifi with changing the original to an AR9285 half sized card
- Ethernet /S/L/E/IONetworkingFamily.kext/Contents/Plugins/ALXEthernet.kext (http://www.osx86.net/view/3446-atheros_ar8131-32-51-52-61-62-71-72.html)
- Bluetooth with Asus usb BT21 dongle (now also use of my Magic mouse) + Airdrop!
- Battery indicator works!
- Sound, speakers, mic, earphones!
- USB 2.0 (usb 3.0 didn't used so far?)
- Function keys (only sound keys; FN + F10,11,12 / ALSO: F5 & F6 Brightness control)
- Trackpad (only cursor, not scrolling with two fingers)
- restart, shutdown
- DVD burner
- SD card reader (working > BIOS > USB configuration > XHCI > Smart auto + override USB drivers)
- Elan touchpad (http://www.osx86.net/downloads.php?do=file&id=3472)
Not (yet) working:
- Full Nvidia GT630m (to disable: http://www.applelife.ru/threads/nvidia-optimus-%D0%B2%D1%8B%D0%BA%D0%BB%D1%8E%D1%87%D0%B0%D0%B5%D0%BC-nvidia.36346/)
- Webcam, only light flashes but doesn't turn on by photo booth
I found also extra information of the ACPI files (for linux):
Maybe someone can port this project...
Also information about the bios mod to enable discrete GT6xx instead of HD4000
Just start with this link here is a lot of info to boot with an USB dongle:
USB write program:
Image for usb :
Follow the instructions, but replace the files with the one's here above (extra + extensions to replace)
instructions of replacement:
1) replace the current folder Extra with the one extra folder in this zip.
2) copy the extensions to replace in this zip to: /System/Library/Extensions
One of my experience; DON'T use the new BIOS 211 or 214 from asus! version 206 works fine! or flash back with "winflash /nodate"
By guest[NL] Voor mensen waar bij de installatie of booten van lion stopt op [ PCI Configuration Begin ]. Deze kexten installeren in S/L/E. En je permisies herstellen natuurlijk!
[ENG]For people that stuck on the line: [ PCI Configuration Begin ] in lion just acces your HDD and add those kext. To S/L/E. Repair your cache and permissions!
[RUS] ??? ?????, ??????? ???????? ?? ?????: [PCI Configuration Begin ] ? ????????? ???????? ??? ??????? ???? ? ???????? ?? Kext. ??? S / L / E.?????? ??? ? ??????????!
By junglejazz1. Audio ALC887
2. Ethernet RTL8111E
3. ASMedia USB 3.0
4. IDE Kext
All kext work fine on this motherboard
By DmosKext for those who don't have AHCI support in there Mobo`s & laptop`s (Intel & AMD)
By ReneUpdate 1.2.1:
Edit [May 20 2013]: Release 1.2.1
� Fixed alignment bug that made 32-bit build for OS 10.7.5 fail.
Edit [May 19 2013]: Release 1.2.0
Implemented support for Isochronous Endpoints.��Should now support webcams, etc... (real-time audio/video streaming).
Updated UIM interface changes in OS 10.8.3.
Added workaround for Intel Series 7 chipset that causes instant-wakeup-on-sleep on some motherboards.
Edit [June 5 2013]: Release 1.2.3
Improved handling of bios semaphore for legacy USB - eliminates a problem that causes some bioses to crash during sleep.
Made sequence for entering sleep mode more robust and safer.
Eliminated potential memory corruption if xhci commands time out.
Eliminated some potential memory leaks, fixed some minor bugs, made some minor optimizations and added a bit more logging.
Edit [June 11 2013]: Release 1.2.4
Overhauled error-handling of non-isoch transfers. Fixed a couple of bugs with KP potential related to transfers.
Optimized handling of transfer timeouts.
Added kext version to 'xhcdump caps' + a couple of diagnostic counters to 'xhcdump running'
build for OSes 10.7.5, 10.8.x. and special version 1.2.4 for Mavericks
Edit [september 13 2013]: Release 1.2.5
Support for OS 10.8.5, OS 10.9.
Support for Lynx Point/Intel Series 8 with 16 xHC ports (8 dual ports).
Edit [October 1 2013, updated October 9 2013]: Release 1.2.6
Added support for VMware virtual xHC device in Workstation 10/Fusion 6.
Fixed serious bug that would cause KPs with any USB3 driver supporting streams endpoints.
Fixed support for streams endpoints to use earlier allocation of rings.
Cleaned up and simplified some of the code that creates control endpoints.
[October 9 Update] Fixed KP when waking from unpowered sleep with streams drive.
By imickThis is a mirror of this file: http://cl.ly/5d7458679f9c749c0d09
The Lacie kexts for USB 3.0 are edited by Modbin. He removed the security and now everyone can use it.
Try it on your own risk! Make a backup first!
By kyndderPack Lenovo IdeaPad Z470
BR > http://shop.lenovo.com/brweb/br/pt/products/laptops/ideapad/z-series/z470/index.html
EN > http://www.lenovo.com/products/us/laptop/ideapad/z-series/z470/
This thread may help someone who are experiencing issues > http://www.osx86.net/10-7-lion/14279-how-install-lion-lenovo-z470-help-me.html
Only tested on the machine with the specs below, made sure to have the exact same specs...
Chipset: Intel HM65 ?
Processor: Core i7-2620M ?
Memory: 6Gb ?
HDD: Western Digital 750Gb ?
Video: Intel HD Graphics 3000 ?
Audio: ALC269 ?
Lan: Realtek RTL8101/8102/8103 ?
Wireless: Atheros AR9285 ?
Essential System Files
FakeSMC.kext (Version 3.1.0 with plugins support)
NullCPUPowerManagement.kext (Version 1.0.0d2 "for non-dsdt users")
Essential Device Drivers
VoodooHDA.kext Patched for ALC269
RealtekR1000 > RTL8101/8102/8103
IO80211Family.kext > Atheros AR9285
AppleACPIPS2Nub.kext > PS2 Devices (Keyboard TrackPad)
ApplePS2Controller.kext > PS2 Devices (Keyboard TrackPad)
VoodooBattery.kext > Battery Meter
SMBios.plist (MacBook Pro 8,1 Sandy Bridge)
org.chameleon.Boot.plist with the following settings...
arch=i386 (Unfortunately, the AR9285 can find Available networks only in 32bit after the update 10.7.3)
IntelCPUMonitor.kext > http://www.projectosx.com/forum/inde...showtopic=1644
IntelThermal.kext > http://www.projectosx.com/forum/inde...showtopic=1594
DSDT Auto-Patcher (App Only) by MaLd0n > http://www.olarila.com/forum/viewtopic.php?f=19&t=507
Text file with Patches for Lenovo IdeaPad Z470 to be used with DSDT Auto-Patcher
with the following patches...
AHCI SATA orange icon
All Patches above can be found here > http://www.olarila.com/forum/viewtopic.php?f=19&t=62
If you have any issues booting the system after the installation, boot Ignoring Caches ( -f )...
All working 100%...
By Mvd120This is the 1.0.4 applenforceATA kext v 1.0.4 created by AnV. it includes the 64bit fix by imk. Go here for the official thread. http://www.insanelymac.com/forum/index.php?showtopic=211866
I can also personally confirm that this infact, does work with Lion, AND tested on ML in both 32 and 64 bit modes,
Update: This should also work in 10.9 mavericks in 64Bit.
By yuszModified PXHCD.kext to support Etron EJ168 USB3
Work well on GA-H61M-USB3-B3 Ver 2.0
Install using Kext Utility and reboot.
By orgixmhMAVERICKS 10.9.0! Working: Sound, Sleep, Sata, Ide, Temps, Natice PowerManagemnt
*** Update your mobo to latest bios, no more hacked bios needed!
With this pack everything working GOOD!
Ok, thats really whats you need to make msi p35 to work with Mavericks 10.9 GM
Remember, the chameleon is configured to use GraphicsEnabler,
you can change that options from Extra/org.chameleon.Boot.plist
My system never takes kp, 10-15 days uptime.
Working fast like hell!
CPU: Core2Duo @ 3.0
SSD: Agility 4 64gb
HDD: Black Caviar 640gb
GPU: Ati Radeon 5770HD
M/B: Msi P35 Neo2 Fi/Fr
Extensions Folder (Use kext helper to install extensions and Repair Permissions)
AppleIntelCPUPowerManagement.kext (Patched Power mngmnt for C2D)
AppleRTL8169Ethernet.kext (This kext will enable the ethernet card)
AppleHDA.kext (Enables the ALC888 sound card)
AppleRTC.kext (Patched RTC for CMOS reset bug)
FakeSMC.kext (Emulates SMC device of a real MAC and returning temps to system- Without this no hack possible)
AppleVIAATA.kext (Enables the Via controller -- IDE and the blue SATA connector)
Boot Folder (If you have GUID partition table you must copy contents of folder to your EFI partition, if you have MBR you must copy to your boot partition )
Extra/dstd.aml (Many fixes for MSI P35 (Over 52 fixes) now you dont need modded bios)
Extra/org.chameleon.Boot.plist (Preconfigured for MSI P35, Change the GraphicsEnabler option if needed)
if you need kexts for 10.7.2 - 10.7.1 - 10.7.0 go to http://www.osx86.net...do=file&id=2155
LAST UPDATE: 10.11.2013
By Arobasefrcredits to Zenith432
Notice: This is for none-Intel USB3.0 controller.
AppleUSBXHCI.kext based on Zenith432's patch.
Install this to /System/Library/Extensions/IOUSBFamily.kext/Contents/PlugIns.
Or use Clover's KextsToPatch with the following Binary patch.
By tenvalHere is a modded IOATAFamily (v2.5.1) from the 10.7.0 Lion Install Disk Image.
It enables booting and installing from SATA IDE Enhanced/Compatible Mode. It's for those who can't boot/install with AHCI nor have this option in BIOS. ONLY FOR ICHx-based SATA chipsets/southbridges. That means, no VIAATA or no JMicron.
It should also allow you to see all SATA ports in your system.
Tested and working on an Asus Maximus II Formula (P45) MotherBoard in Enhanced IDE SATA Mode.