By JohnWake from sleep distortion issue is finally fixed
There is a Snow Leopard version and a Leopard version.
By drappleThe CrackleFix fixt the bug when you go to sleep, and after wake up the sound are not good (Crackle).
Lenovo 3000 N200
FSC Amilo Pro V3205
ALC272 Driver for Samsung N310 on Snow Leopard
Should work for Samsung NC10 also
By LynkDriver Azalia Audio for the most common devices, it only have audio output.
By nfo_fox33Install AppleHDA.kext and HDAEnabler.kext (Backup Your Original File and Replace for This)
By ffuentesdExtension modificada para dell gx280 y dell gx620 preparada para funcionar panel de Audio incluido necesario instalar para que funcione correctamente en espa?ol
By resetuHere is the working fake driver for Sigmatel 9205 HD audio, please use with DSDT toghter. put it to the extra or S/L/E.
By JohnAsus P5Q tested ok
Asus P5Q3 tested ok
Asus P5Q-EM tested ok
Asus P5QL-EM tested ok
Asus P5Q-Pro tested ok
Asus P5Q-SE/R tested ok
Asus P5Q-C tested ok
Asus P6T tested ok
Asus P6T-SE tested ok
Asus P5N7A-VM tested ok
Asus P5QL-E tested ok
Asus M3A78 PRO
Gygabyte GA-EP43-S3L tested ok
MSI P45 NEO3-FR tested ok
By buckAudio (ALC888VC), with Azalia driver found here (remove AppleHDA and HDAenabler kext before installing)
By buckHello. This is what you need for this guide
Kalyway 10.5.2 DVD
First, set up your board to your liking. If you're using 533MHz RAM, go into the BIOS and increase voltage by 0.5V this should give you a clock speed of 667MHz.
Now, install Kalyway with the following options
Change the "Sound Drivers" to the third option.
Put the SMBIOS to the iMac or 667 MHz one. They are the same =]
Now, choose your other settings and run through installer.
Remember, unless you are sure you're C2D or C2Q does not boot without the cpus=1 flag, dont put it on.
Now, your Ethernet should work out of the box. You just need the audio drivers and it should be working.
By JohnEnables audio on a number of audio chipsets and models
By JohnInject audio layouts in conjunction with a modded AppleHDA