By KemalALKINALC662 New Kexts - Lion & etc. Support & Working
By: KemalALKIN [Gaziantep in Turkey]
By diskeeperWorking on:
ASUS P8P67 GA Rev 3.0
[*=left]Elite Group ECS H55H-I
[*=left]Asrock Z68 PRO-M
[*=left]Gigabyte P55-UD3L Rev 2.3
[*=left]ASRock extreme4 P67
UPDATE: If you can't use DSDT edit, try the HDAEnabler892.kext!
Requires DSDT mod:
Name (_ADR, 0x001B0000)
Method (_PRW, 0, NotSerialized)
Return (Package (0x02)
Method (_DSM, 4, NotSerialized)
Store (Package (0x08)
0x92, 0x08, 0xEC, 0x10
0x7C, 0x03, 0x00, 0x00
DTGP (Arg0, Arg1, Arg2, Arg3, RefOf (Local0))
By JohnAschar binary patched the AppleHDA.kext in Snow Leopard 10.6.4 so it will support the AD2000B audio chipset. If you've got this chipset, then you need this file to get audio back in Snow Leopard 10.6.4
Open Terminal and type these commands:
sudo cp -R AppleHDA.kext /System/Library/Extensions/
sudo chown -R root:wheel /System/Library/Extensions/AppleHDA.kext
sudo chmod -R 755 /System/Library/Extensions/AppleHDA.kext
Wait about 15 minutes (kextcache needs to rebuild) or use pfix to manually rebuild cache, then reboot and you should have audio back!
Notice: You might need to manually remove caches, use this command:?sudo rm -rf /system/Library/Caches/com.apple.kext.caches
By resetuHere is the working fake driver for Sigmatel 9205 HD audio, please use with DSDT toghter. put it to the extra or S/L/E.
By catboyThis version of VoodooHDA work Mic & Digital out.
Don't remove AppleHDA.kext, delete only any enabler.
By CharlieSheenPatched AppleHDA for IDT 92HD73C1 for OS X Lion.
Make sure VoodooHDA or anything similar is uninstalled prior to installing this Kext.
Install to System/Library/Extensions. Backup the original AppleHDA.kext first.
Tested on Dell Studio 1558 laptop on Lion. Works on any other laptop with same audio chipset.
By alexegaTested on a laptop SONY VAIO Series F. Sound works in the speakers and headphones, a HDMI does not work, there is little noise (adjusted panel).
By buckHello. This is what you need for this guide
Kalyway 10.5.2 DVD
First, set up your board to your liking. If you're using 533MHz RAM, go into the BIOS and increase voltage by 0.5V this should give you a clock speed of 667MHz.
Now, install Kalyway with the following options
Change the "Sound Drivers" to the third option.
Put the SMBIOS to the iMac or 667 MHz one. They are the same =]
Now, choose your other settings and run through installer.
Remember, unless you are sure you're C2D or C2Q does not boot without the cpus=1 flag, dont put it on.
Now, your Ethernet should work out of the box. You just need the audio drivers and it should be working.
By tuanpekoe- This VoodooHDA fix for bad sound.
- Use Kext Utility to install .
By xmen1VoodooHDA 2.7.3 edited for Via VT1708S, do not forget to change your device ID in IOPCIPrimaryMatch. For those who have problems with noise sound, before install this kext , in Info.plist, change Boolean Vectorize to YES, then install, repair permissions and reboot . Working for me. I would appreciate feedback.
By HoarfrostVooDooHDA.kext modified for ALC662 in ZOTAC G43ITX-A-E motherboard
100% works, tested on Mac OS X 10.6.6 Snow Leopard Retail 32/64-bit
Must work on 10.6.5 32/64 bit.
Works without VooDooHDAPrefPane (sound level shanges like in original Mac)
Before insallation remove AppleHDA.kext to private Kernel Panic
For details visit http://hoarfrost.jimdo.com/
By BansakuAppleHDA.kext for ALC888 HD audio. 10.6.3 only!
(Tested on GA-P55-UD3R. May or may not work for other ALC888 variants.)
- AC3/DTS and analogue 5.1 output?
- No need for DSDT editing
- All inputs and outputs now show up correctly in System Profiler and Sound Prefs Pane
- It's just 1 kext that you have in your Extensions folder anyway
Install is easy; remove your old AppleHDA.kext (HDAenebler.kext too if present) and VoodooHDA (if installed) then drag the new AppleHDA.kext onto Kext Utility (or whatever app you use to install kexts), repair permissions and reboot! Enjoy!
By jamieyanI modified it from VoodooHDA-AP and VoodooHDA-2.7.2. No noise. It is perfect in laptop Lenovo V360A390.
Finally got a kext that did the job! For all of you who are in search of a kext that uses AppleHDA.kext and not VoodooHDA.kext here it is.. Hope it works for you as well. Got it from insanelymac after some googling.. This one comes out louder too!
I did not try to load this kexts with AppleHDADisabler.kext running from the /Extra folder, so just in case and since this kexts use the AppleHDA.kext, might want to think about removing the kext just in case and if you like many other happen to have it.
By leociottiKext for Via Audio VT1705
Tested on SL 10.6.4 32-bit and 64-bit - 100% working
Front Output (phone)
Change Volume Control
By oldnapalmVoodooHDA patched for AD1988B (tested on Asus P5E)
- Line-out (green rear)
- Line-out (black rear)
- Line-out (orange rear)
- Line-out (grey rear)
- Headphones (green front) auto-detect
- Line-in (blue rear)
- Microphone (pink rear)
- Microphone (pink front)
- Microphone auto-detect (have to select in preferences)
- SPDIF-out (rear)
If you have KP remove AppleHDA and set PCI ID in plist if you have HDMI audio on video board.
For multichannel create an aggregate device in Applications - Utilities - Audio MIDI Setup
If your mobo has SPDIF-in you may need to change default association for one of the SPDIF. Discussion here
By OrinmoonMake sure you install it in System folder not the Extra folder.
VoodooHDA 2.7.2 + EDIT ALC269 Working only SL 10.6.x 64 - bits
By rohan_pceRealtek ALC 880(device id:- 0880) HD AUDIO CODEC (UPLOADED BY ROHAN AGASHE).
By DarkicicleMOBO: EMX-945GC-1333
Here it is.. 8 Channel Audio/HD Audio Output
(If u messed installing alot of audio.dmg/pkg/kexts files, i recommended clean install.)
Remove/Backup AppleHDA and VoodooHDA System/Library/Extension
Then Install Realtek ALC883 then Restart..
"Other" 8 Channel Audio Boards also work..
Hope it will help you Guys!! Cheers!!!
By tuxyRealtek ALC1200
00:1b.0 Audio device : Intel Corporation 82801JI (ICH10 Family) HD Audio Controller [8086:3a3e]
Device ID: 0x3a3e8086