Jump to content

ATI-5450_series_injector 1.0

Sign in to follow this  

About This File

ATI5000Injector 1.0, included :

- Hd5450

- Kext Helper b7

- SystemInfo

Kext: ATi 5000injector

Yang diperluhkan hanya ATI5000injector.kext, ATI5000controller.kext & ATIRadeionX3000.kext

Tools: Kext Helper b7

Buat nginstall kext.

System Info : Buat mengetahui vendor id dan hardware id.

Step by step:

1. Jalankan System Info dan catat vendor id serta hw id, punya saya kurang lebih seperti ini 0x68F91002.

2. Edit ketiga file kext tersebut diatas, cari IOPCIMatch ditambahkan 0x68F91002 (sesuai hwid)

3. Setelah semua kext diedit, kemudian restart.

Result:

Hasilnya cukup memuaskan yaitu full resolusi, QE/CI juga.

Screenshoot:

Layar Dekstop

Resolution

======================

Shared by: @cysco,,,,,on,,,mac-inul_DOT_com




User Feedback

Recommended Comments

Hello,

this kext work with Asus EAH 5450 SILENT 1GB DDR2? Anyone tried it?

I must edit com.apple.Boot.plist ? If yes, so how?

Thank you for answer(s)

Share this comment


Link to comment
Share on other sites
drag 3 files

Ati contoller ,frame, and Ati 5000 in to ktxt helper----U must have password in Ur OSx

select each Then Install------restart simple

what?s about the com.apple.plist? is there anyway to update by myselft? my grafic card is a sapphire radeon hd 5450

thanks in advance ;)

Share this comment


Link to comment
Share on other sites

1. Jalankan System Info dan catat vendor id serta hw id, punya saya kurang lebih seperti ini 0x68F91002.

2. Edit ketiga file kext tersebut diatas, cari IOPCIMatch ditambahkan 0x68F91002 (sesuai hwid)

3. Setelah semua kext diedit, kemudian restart.

Share this comment


Link to comment
Share on other sites

The trick (thanks to machinist) might be to find the correct PCIRootUID value, in Terminal viaioreg -l | grep -15 "AppleACPIPCI" | grep "_UID"which will output a # (known values betw. 0 and 4, but higher values might appear)then enter that value into the org.chameleon plist as follows: PCIRootUIDur# have your injector kext installed best to S/L/E, reboot.If that didn't work:delete *any* grfx enablers from E/E and S/L/Eadd the following entries into your boot plist GraphicsEnablerYesAtiConfigEulemurremove *ANY* EFI strings from device properties (best delete kex/string)savedelete extension (if present) AND (mandatory step here!) kernel caches, in Lion: /System/Library/Caches/Startupmake sure you have a current Chameleon bootloader installed (e.g. via Chameleon Wizard, or Chimera)rebootsee if EVERYTHING works (res. changes/ QE-CI e.g. by launching Chess/ multi-monitors/ DVD Player)

Share this comment


Link to comment
Share on other sites

Kexts from this pkg to install to S/L/E:ATI5000injector.kextATI5000controller.kextATIFramebuffer.kextATISupport.kext might NOT be necessary to install - try w/o first(ATIRadeionX3000.kext is NOT present in this pkg...)

Share this comment


Link to comment
Share on other sites

I can't even download this,everytime i try it says maximum downloads achieved per day.

What the heck.

Share this comment


Link to comment
Share on other sites

ATI5000Injector 1.0, included :

- Hd5450

- Kext Helper b7

- SystemInfo

Kext: ATi 5000injector

Yang diperluhkan hanya ATI5000injector.kext, ATI5000controller.kext & ATIRadeionX3000.kext

Kext: ATI 5000injector

["That's just"?] ATI5000injector.kext, ATI5000controller.kext & ATIRadeionX3000.kext

Tools: Kext Helper b7

Buat nginstall kext.

Tools: Kext Helper b7

Create nginstall kext.

System Info : Buat mengetahui vendor id dan hardware id.

System Info: Make aware hardware vendor id and id.

Step by step:

1. Jalankan System Info dan catat vendor id serta hw id, punya saya kurang lebih seperti ini 0x68F91002.

2. Edit ketiga file kext tersebut diatas, cari IOPCIMatch ditambahkan 0x68F91002 (sesuai hwid)

3. Setelah semua kext diedit, kemudian restart.

Step by step:

A. Run the System Info and note the vendor id and the hw id, I have something like this 0x68F91002.

Two. Third edit kext file mentioned above, looking IOPCIMatch added 0x68F91002 (suitable hwid)

Three. After all kext edited, and then restart.

Result:

Hasilnya cukup memuaskan yaitu full resolusi, QE/CI juga.

Result:

As a result that is satisfactory full resolution, QE / CI as well.

Share this comment


Link to comment
Share on other sites

This method worked for me, with a 512mb 5450 (same device/vendor ID as OP used: 0x68F91002)

However, I'm using my 5450 as a second video card in my 2nd PCI 'x2' slot. Got an 'Unsupported Card!' error during boot in iAtkos L2, even after doing the steps above, but it worked. I had to switch resolutions around to get my display (a Wacom Cintiq 12wx, 1280x800) to work at the correct resolution. 1280x800 didn't work until I did 'Detect Displays' in Display Preferences, and even then I still had to switch to a different resolution, then back to 1280x800. Now it's working perfect.

Terima kasih! (I think that's 'Thanks' in Malay?)

p.s. my 2?:

1. make sure you add your device/vendor string to all of the kexts. the injector kext already had my string, but the other two did not.

2. i prefer to use /Extra/Extensions whenever that's an option, and that seems to be working for me

3. Not sure if it's relevant, but here's my org.chameleon.Boot.plist

<?xml version="1.0" encoding="UTF-8"?>

EthernetBuiltIn

Yes

Graphics Mode

1920x1080x32

GraphicsEnabler

Yes

Kernel Flags

arch=X86_64

Quiet Boot

Yes

Timeout

5

UseKernelCache

No

Share this comment


Link to comment
Share on other sites

Thank you very much, it works on my Sapphire Radeon HD 5450 2GB DDR3

My Snow Leopard iATKOS 1.6.3

ATI Radeon HD 5450 Cedar

Device ID 1002-68F9

E199-174B Subsystem

Peace!!!

Share this comment


Link to comment
Share on other sites

Hi,

I have a problem with a saphir ATI 5450 512mb.

It s reconized as a ATI 5000 instead of a 5450, QE/CI appears to work but when i launch " Ableton Live " it crashes.

The crash seems to be releated to opengl.

Any id?a ?

( Ableton worked fine before i replaced my geforce for the ATI )

Share this comment


Link to comment
Share on other sites

I installed iATKOS L2. after installation it boot and give me an error "Unsupported card". Please tell me how to boot into OS X so i can make changes in Kext with above files so i can use by comp os x with full ATI 5450 1GB graphics. I am totally new... step by step info from boot to editing kext file is preferable. thx thx thx

THX

Share this comment


Link to comment
Share on other sites

bro finder sedebarnya kok g transparant yaa. di preferens g ada menunya transparat . terus waktu bukak launchpad berpindah ke tab lain nyendat2 :(

Share this comment


Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Add a comment...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.