Jump to content
Sign in to follow this  
Shaneee

[AMD] El Capitan/Yosemite Post Install Preperation

Recommended Posts

This tutorial will assist you to copy the needed kernel and Extra folder to your HDD once you've finished installing OS X.
 
Note that where it says "Your HDD Name" or "Your USB Name" you must replace this with the partition names. For example, ElCapitanHD or with spaces it is "El Capitan HD"
 
To begin you will need to boot into your USB installer. Once past the language selection you will see the menu bar. Navigate to Utilities > Terminal
 
From here, if you don't know the names of your drives type the command below to find them,
 
diskutil list
 
Now that you know the names. Start by navigating to the root of your USB.
 
cd /Volumes/"Your USB Name"
 
Now copy the Extra folder to the HDD.
 
cp -R Extra /Volumes/"Your HDD Name"/
 
Now check to make sure it copied,
 
cd /Volumes/"Your HDD Name"
ls
 
You should see the Extra folder there now. Now to copy the kernel. We need to go back to the USB drive and copy it to the HDD.
 
cd /Volumes/"Your USB Name"/System/Library/Kernels/
cp -R kernel /Volumes/"Your HDD Name"/System/Library/Kernels/
 
The kernel should now be in place. If you want you can also copy it to the Extra folder for good measure,
 
cd /Volumes/"Your USB Name"/System/Library/Kernels/
cp -R kernel /Volumes/"Your HDD Name"/Extra/
 
You can now reboot. Once booted into OS X install Enoch to your HDD. Make a copy of your Extra folder first as the Enoch instalation may edit some files. You can now boot from the HDD rather than USB.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

Sign in to follow this  

×