Jump to content


  • Content Count

  • Donations

  • Joined

  • Last visited

About alex009988

  • Rank
    Junior Member

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

  1. Thanks as well that supported my proposal.
  2. Hi everyone. What do you think about to devide the bootloaders section on three subforums? That is Chameleon Clover XPC Other bootloaders. The point is that these bootloaders develope and that part of the forum have too many files. I think it would be more rational to seek after necessary file to you in an appropriate thread. It would be more comfortable on my opinion. Regards, Alex.
  3. Hi guys. Please test new version agains stoping during an intense traffic.
  4. alex009988


    Version 1.0


    More detailed about bareBoot see here. http://www.insanelymac.com/forum/topic/287686-bareboot/ In the folder EFI, you can find config.plist which has all posible parameters. You have to remove and correct some of the parameters
  5. The output device ought to appear when you connect TV to your laptop. And during the connection you should choose necessary output at setting of sound.
  6. Kevhawk. Is your hdmi-port detected by system when you plug HDMI-Cable to your laptop. Volume level is control by TV, not by your laptop!
  7. If you have 10.8.3, set ver 3 up. If you have 10.8.2, set ver 2 up.
  8. Version 1.0


    I made a new theme for XPC. There is first theme that I did for this bootloader. I think I will make some more themes for it. And will attach them here The whole boot-loader is here http://www.osx86.net/view/3649-xpc_0.90.40.html Screenshot
  9. Year unfortunately I couldn't fix it. I wil try to patch new AppleBCM5701Ethernet for this deal.
  10. http://www.insanelymac.com/forum/topic/136470-any-drivers-for-jmicron-jmb38x/#entry1896751 Artzuk12 Try my VoodooSDHC.
  11. Nick_777 Do you have this problem? http://www.insanelymac.com/forum/topic/283052-appledvdplayer-and-applesmartbatterymanager/
  12. Archi, Please describe your problem here http://www.insanelymac.com/forum/topic/286379-xpc/
  13. Huge thank for your work iPhoneTome! We hope to see a new releases of XPC with fixes from any mistakes.
  14. Version 1.0


    Hello. This page will be always updated. This is a new version of XPC. http://www.insanelymac.com/forum/topic/286379-xpc/ http://board.xpc-efi-forum.de/ Please, visit these links about any issues and problems. Instruction for installing XPC 1) Format your USB flash drive into FAT32 2) Launch XPC Boot Prepare Tool, and choose USB flash drive(don't make any mistakes, otherwise you should reinstall Chameleon on your main disk over again) 3) Take out your USB flash drive and put into back 4) Copy files of FullXPC14022013 You can install the XPC straight on your computer, but the your hard disk must have GUID Partition Table. 01.04.2013 -Some bugfix -Display of XPC version changed -Added new setting SkipExtraKextIfKCContainsFakeSMC 1 If set to 1, kernelcache will be searched for FakeSMC, and extra_kext will be skipped if it will be found in cache. Thx to aschar! 31.03.2013 -Fix DDR2 speed detection, thx to TimeWalker75a! -Some bugfix -Display of XPC version changed 30.03.2013 -Some bugfix -Fixed VolumeLabelText gets not used, thx to Alex! -Display of XPC version -Added new HotKey F2 to save an Screenshot in efi\xpc\screenshots. Included is an Windows-Tool (Dot.Net 3.0) to convert screenshots to JPEG format. 23.03.2013 Bugfix with taking DSDT that was only in version from 20.03.13 20.03.2013 Bugfix for inject NVIDIA. 18.03.2013 Re-enabled small OS-Type indicator icons. Some small bugfix. 17.03.2013 Re-enabled use of efi\xpc\theme\xpc_wallpaper.png Some small bugfix. 16.03.2013 Fix memory detection bug, scrolling in file-browser is new gui now (smoother scrolling). 15.03.2013 Some bugfix, scrolling in settings-editor is new gui now (smoother scrolling). 12.03.2013 Fixed Mach-O Patcher. For most Mach-O binaries to patch, XPC must not use kernelcache, because they are OSBundleRequired 'Safe Boot', and not in the cache. Anyway, it is always an better idea not to load kernelcache. That is for real Macs and not Hacks. Well, no big deal huh, 30 sec. longer boot no ------------------------------------------------------------------------ 11.03.2013 Native Ivybridge Powermanagement. Added code for creating X86PlatformPlugin needed P- and C-States. For this, an IvyBridge or SandyBridge cpu is required, as well as an Board-Id and Mac-Model. Set CreatePStates to 1 (XPC will choose old or new code after checking if new code is possible). Added show CPU TDP in Hardware-Browser if Bridge-Cpu is used. Added new key for SSDTHandling section: WorkaroundIvyBug 1 1=fix, 0=no change This will fix SpeedStep for IvyBridge CPU (try without, and use if SpeedStep will not work well this way) 07.03.2013 Fixed some DDR2/3 and SPD detection problem. ------------------------------------------------------------------------ Late 06.03.2013 New added create P-States from XPC: The new key for SSDHandling Section are : CreatePStates 1 PLimitDict 0 MultiMin 12 MultiMax 37 CreatePStates, 1 create, 0 dont create. PLimitDict, the value you get from ACPI_SMC_PLATFORM. MultiMin + MultiMax, the override for the min/max multi for your CPU. For example mine are 12 and 37, should not be used as you can control if XPC detects your multis with key '9' in GUI. So only use this if values are wrong. Multis displayed are 1C, 2C, 3C, 4C. Please Report if it will work. You should set RemoveSSDT to 1 when you want to create P-StATES. ------------------------------------------------------------------------ 06.03.2013 Some bugfix build 2. Some more fixes, DDR2 detection fix, as well some other. Report all problems please! Thx! ------------------------------------------------------------------------ 03.03.2013 Some bugfix, fix DDR2 RAM detection 26.02.2013 Removed use of Wallpaper (for now). If you don't have luck with entering to GUI 24.02.2013 Bugfix for detecting CPU frequency. Please leave feedback! New XPC GUI 1.5 Beta: Reworked new XPC GUI beta. Changed theme.plist, added theme folder in efi\xpc\, added xpc_wallpaper.png, and some code to make the GUI some smoother. Have a look in download! Please remember to copy the png icons! 22.02.2013 New build with new setting: NoImageBootDevices 1 This switch set to 1 means that no Image-Boot devices will be shown in GUI after boot. If set to 0 or this switch is missing, Image-Boot devices will be shown. In GUI you can toggle between display and hide Image-Boot devices with key '6'. ------------------------------------------------------------------------------------ 22.02.2013 CPU speed fix. Some importent bugfix. Added boot from InstallESD.dmg inside Applications-Folder. In XPC GUI you will see your volume with an OSX version displayed, and your volume with an label "Image-Boot". This will boot the installer. InstallESD.dmg can still lay in root of any HFS+ volume to boot from this, like before. !! Bugfix Build from 22.02.2013, 00:10 !!
  15. Version 1.0


    This driver is for these devices with fix against stoping under an intense traffic It work with Snow Leopard, Lion, and Mountain Lion. Works in x34 and x64 mode as well. { DEVICEID_BCM5722, "BCM5722 NetXtreme Server Gigabit Ethernet" }, { DEVICEID_BCM5754, "BCM5754 NetXtreme Gigabit Ethernet" }, { DEVICEID_BCM5754M, "BCM5754M NetXtreme Gigabit Ethernet" }, { DEVICEID_BCM5755, "BCM5755 NetXtreme Gigabit Ethernet" }, { DEVICEID_BCM5755M, "BCM5755M NetXtreme Gigabit Ethernet" }, { DEVICEID_BCM5787, "BCM5787 NetLink (TM) Gigabit Ethernet" }, { DEVICEID_BCM5787M, "BCM5787M NetLink (TM) Gigabit Ethernet" }, { DEVICEID_BCM5906, "BCM5906 NetLink (TM) Fast Ethernet" }, { DEVICEID_BCM5906M, "BCM5906M NetLink (TM) Fast Ethernet" }, { DEVICEID_BCM57788, "BCM57788 NetLink (TM) Gigabit Ethernet" }, { DEVICEID_BCM5784, "BCM5784 NetLink Gigabit Ethernet" }, { DEVICEID_BCM57785, "BCM57785 NetLink (TM) Gigabit Ethernet" }, { DEVICEID_BCM57781, "BCM57781 NetLink (TM) Gigabit Ethernet" }, { DEVICEID_BCM57780, "BCM57780 NetLink (TM) Gigabit Ethernet" }, { DEVICEID_BCM5752, "BCM5752 NetLink (TM) Gigabit Ethernet" }, { DEVICEID_BCM5761, "BCM5761 NetLink (TM) Gigabit Ethernet" }, #define DEVICEID_BCM5722 0x165A #define DEVICEID_BCM5754 0x167A #define DEVICEID_BCM5754M 0x1672 #define DEVICEID_BCM5755 0x167B #define DEVICEID_BCM5755M 0x1673 #define DEVICEID_BCM5787 0x169B #define DEVICEID_BCM5787M 0x1693 #define DEVICEID_BCM5906 0x1712 #define DEVICEID_BCM5906M 0x1713 #define DEVICEID_BCM57788 0x1691 #define DEVICEID_BCM5784 0x1698 #define DEVICEID_BCM57785 0x16b5 #define DEVICEID_BCM57781 0x16b1 #define DEVICEID_BCM57780 0x1692 #define DEVICEID_BCM5752 0x1600 #define DEVICEID_BCM5761 0x1681 If you find extra issues, please tell about it here http://www.insanelym...river-3264-bit/ Cosmetic of DSDT and posible problems with "Built IN" http://www.insanelym...00#entry1918594
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.