Jump to content

HackinDoge

Supervisors
  • Content Count

    3,489
  • Donations

    $0.00 
  • Joined

  • Last visited

  • Days Won

    151

Files posted by HackinDoge

  1. VoodooI2C for ELAN1200 Trackpad

    This copy of alexandred's VoodooI2C (normally for use with ELAN1000) has been patched for use with ELAN1200 trackpads, and is confirmed compatible with macOS 10.13 High Sierra.
     
    Recommended install location is [ESP]/EFI/CLOVER/kexts/[OS Version].

    239 downloads

    0 comments

    Updated

  2. AppleIntelInfo

    PikerAlpha's AppleIntelInfo, precompiled for use with OS X El Capitan.
     
    To use, run the following in Terminal and check output in Console.app:
    sudo kextload AppleIntelInfo.kext Where "AppleIntelInfo.kext" is the correct path for the kext.
     
    When done, run the following to unload the kext:
    sudo kextunload AppleIntelInfo.kext Again, where "AppleIntelInfo.kext" is the correct path for the kext.
     
    Be sure to unload the kext when you're done, otherwise it will spam the console with messages!

    602 downloads

    0 comments

    Updated

  3. [10.11] AppleHDA for VT2021

    This is a patched AppleHDA from OS X El Capitan 10.11.2?(15C50) for users with the VT2021 codec, based off the work done by Nithy.
    Apply DSDT patch, Install to /System/Library/Extensions, then reboot!
    Full installation instructions can be found here.
    AppleHDA-272.51.3.zip

    957 downloads

    6 comments

    Updated

  4. [10.10.4] AppleHDA for VT2021

    This is a patched AppleHDA from OS X Yosemite 10.10.4 (14E46) for users with the VT2021 codec, based off the work done by Nithy.
    Apply DSDT patch, Install to /System/Library/Extensions, then reboot!
    Full installation instructions can be found here.

    1,564 downloads

    8 comments

    Updated

  5. [ISO] Chameleon 2.3svn r2487

    Based on this ISO. It contains:
    Chameleon PKG installer
    Chameleon binaries
    myHack Generic Extra folder

    Simply burn to a CD, and boot!

    11,364 downloads

    3 comments

    Updated

  6. Ozmosis for GA-Z77-D3H (Rev 1.0)

    For the adventurous. NVRAM is not writable in this version (F22), so SMBIOS can't be set. It does, however, boot successfully into OS X.

    The following changes were made:
    Compress CORE_DXE to make room for Ozmosis.
    Delete OEM "Filesystem" driver to make room for Ozmosis-enhanced version.
    Ozmosis 1.01.0739M was installed. Hermit Shell included.
    OsxAptioFixDrv-64 and EmuVariableUefi-64 were added, although the latter doesn't seem to enable NVRAM functionality...

    If updating from a previous BIOS version and are using the VT2021 DSDT patch, boot into OS X with the new F22 BIOS and make a new DSDT.

    Instructions on how to make your own: http://www.hackintoshosx.com/topic/20657-ozmosis

    Z77D3H-Ozmosis.rpt:



    329 downloads

    2 comments

    Updated

  7. [10.9.4+] AppleHDA for VT2021

    This is a patched AppleHDA from OS X 10.9.4 (13E28) for users with the VT2021 codec, based off the work done by Nithy.

    Apply DSDT patch, Install to /System/Library/Extensions, then reboot!

    Full installation instructions can be found here.

    2,144 downloads

    6 comments

    Updated

  8. Clover v2k r2689

    Clover v2 is open source based on different projects: Clover, rEFIt, XNU, VirtualBox.
    The main is EDK2 latest revision. http://sourceforge.net/projects/cloverefiboot/
    Main features:
    - boot into 10.4 - 10.9 OSX, Windows EFI and Linux EFI
    - It's EFI bootloader provides RuntimeServices for OS that impossible for Legacy Bootloaders
    - mostly Clover do automatic detection of hardware and set all properties by default.
    But user can change them by config.plist
    - with Clover you may restart into other OS from Startup Disk prefPane
    - UUID written into config.plist will be the same as in OS
    - SMBIOS will be corrected to standard 2.6
    - ACPI will be corrected to standard 4.0.
    Custom DSDT will be loaded from booted partition or from EFI folder
    - customizable RestartFix and sleep/wake fixes and PCIRootUID value
    - Graphics Properties Injector for ATI, NVidia and Intel for wide range of supported cards.
    Also customizable.
    - USB fix (LegacyOff, Ownership, Builtin, clock-id) up to USB 3.0
    - HDA injector and Ethernet builtin injector
    - CPU turbo and P- and C-states generator
    - ACPI tables loading (SSDT-xx, APIC, BOOT, SLIC, SLIT, SRAT, UEFI...)
    - extra kexts loading and security mode for FireWire
    - default boot after timeout, customizable GUI , and saving screenshots from GUI typing F10
    - saving boot.log in OS and preboot.log from GUI by typing F2
    MD5 (sym/Clover_v2k_r2689.pkg) = 0223e522fd82abae24ec6c21d2c5f411

    689 downloads

    1 comment

    Submitted

  9. Clover v2k r2685

    Clover v2 is open source based on different projects: Clover, rEFIt, XNU, VirtualBox.
    The main is EDK2 latest revision. http://sourceforge.net/projects/cloverefiboot/
    Main features:
    - boot into 10.4 - 10.9 OSX, Windows EFI and Linux EFI
    - It's EFI bootloader provides RuntimeServices for OS that impossible for Legacy Bootloaders
    - mostly Clover do automatic detection of hardware and set all properties by default.
    But user can change them by config.plist
    - with Clover you may restart into other OS from Startup Disk prefPane
    - UUID written into config.plist will be the same as in OS
    - SMBIOS will be corrected to standard 2.6
    - ACPI will be corrected to standard 4.0.
    Custom DSDT will be loaded from booted partition or from EFI folder
    - customizable RestartFix and sleep/wake fixes and PCIRootUID value
    - Graphics Properties Injector for ATI, NVidia and Intel for wide range of supported cards.
    Also customizable.
    - USB fix (LegacyOff, Ownership, Builtin, clock-id) up to USB 3.0
    - HDA injector and Ethernet builtin injector
    - CPU turbo and P- and C-states generator
    - ACPI tables loading (SSDT-xx, APIC, BOOT, SLIC, SLIT, SRAT, UEFI...)
    - extra kexts loading and security mode for FireWire
    - default boot after timeout, customizable GUI , and saving screenshots from GUI typing F10
    - saving boot.log in OS and preboot.log from GUI by typing F2
    MD5 (sym/Clover_v2k_r2685.pkg) = 68a6136691d6562e8e7692dc974d9bd2

    229 downloads

    1 comment

    Submitted

  10. Clover v2k r2669

    Clover v2 is open source based on different projects: Clover, rEFIt, XNU, VirtualBox.
    The main is EDK2 latest revision. http://sourceforge.net/projects/cloverefiboot/
    Main features:
    - boot into 10.4 - 10.9 OSX, Windows EFI and Linux EFI
    - It's EFI bootloader provides RuntimeServices for OS that impossible for Legacy Bootloaders
    - mostly Clover do automatic detection of hardware and set all properties by default.
    But user can change them by config.plist
    - with Clover you may restart into other OS from Startup Disk prefPane
    - UUID written into config.plist will be the same as in OS
    - SMBIOS will be corrected to standard 2.6
    - ACPI will be corrected to standard 4.0.
    Custom DSDT will be loaded from booted partition or from EFI folder
    - customizable RestartFix and sleep/wake fixes and PCIRootUID value
    - Graphics Properties Injector for ATI, NVidia and Intel for wide range of supported cards.
    Also customizable.
    - USB fix (LegacyOff, Ownership, Builtin, clock-id) up to USB 3.0
    - HDA injector and Ethernet builtin injector
    - CPU turbo and P- and C-states generator
    - ACPI tables loading (SSDT-xx, APIC, BOOT, SLIC, SLIT, SRAT, UEFI...)
    - extra kexts loading and security mode for FireWire
    - default boot after timeout, customizable GUI , and saving screenshots from GUI typing F10
    - saving boot.log in OS and preboot.log from GUI by typing F2
    MD5 (sym/Clover_v2k_r2669.pkg) = 368f125f3a7ed37fa60d3395d589fd14

    192 downloads

    1 comment

    Submitted

  11. Clover v2k r2658

    Clover v2 is open source based on different projects: Clover, rEFIt, XNU, VirtualBox.
    The main is EDK2 latest revision. http://sourceforge.n.../cloverefiboot/
    Main features:
    - boot into 10.4 - 10.8 OSX, Windows EFI and Linux EFI
    - It's EFI bootloader provides RuntimeServices for OS that impossible for Legacy Bootloaders
    - mostly Clover do automatic detection of hardware and set all properties by default.
    But user can change them by config.plist
    - with Clover you may restart into other OS from Startup Disk prefPane
    - UUID written into config.plist will be the same as in OS
    - SMBIOS will be corrected to standard 2.6
    - ACPI will be corrected to standard 4.0.
    Custom DSDT will be loaded from booted partition or from EFI folder
    - customizable RestartFix and sleep/wake fixes and PCIRootUID value
    - Graphics Properties Injector for ATI, NVidia and Intel for wide range of supported cards.
    Also customizable.
    - USB fix (LegacyOff, Ownership, Builtin, clock-id) up to USB 3.0
    - HDA injector and Ethernet builtin injector
    - CPU turbo and P- and C-states generator
    - ACPI tables loading (SSDT-xx, APIC, BOOT, SLIC, SLIT, SRAT, UEFI...)
    - extra kexts loading and security mode for FireWire
    - default boot after timeout, customizable GUI , and saving screenshots from GUI typing F10
    - saving boot.log in OS and preboot.log from GUI by typing F2

    MD5 (sym/Clover_v2k_r2658.pkg) = b7fdde1015122e39081f3f2a617b5328

    580 downloads

    0 comments

    Submitted

  12. Clover v2k r2654

    Clover v2 is open source based on different projects: Clover, rEFIt, XNU, VirtualBox.
    The main is EDK2 latest revision. http://sourceforge.n.../cloverefiboot/
    Main features:
    - boot into 10.4 - 10.8 OSX, Windows EFI and Linux EFI
    - It's EFI bootloader provides RuntimeServices for OS that impossible for Legacy Bootloaders
    - mostly Clover do automatic detection of hardware and set all properties by default.
    But user can change them by config.plist
    - with Clover you may restart into other OS from Startup Disk prefPane
    - UUID written into config.plist will be the same as in OS
    - SMBIOS will be corrected to standard 2.6
    - ACPI will be corrected to standard 4.0.
    Custom DSDT will be loaded from booted partition or from EFI folder
    - customizable RestartFix and sleep/wake fixes and PCIRootUID value
    - Graphics Properties Injector for ATI, NVidia and Intel for wide range of supported cards.
    Also customizable.
    - USB fix (LegacyOff, Ownership, Builtin, clock-id) up to USB 3.0
    - HDA injector and Ethernet builtin injector
    - CPU turbo and P- and C-states generator
    - ACPI tables loading (SSDT-xx, APIC, BOOT, SLIC, SLIT, SRAT, UEFI...)
    - extra kexts loading and security mode for FireWire
    - default boot after timeout, customizable GUI , and saving screenshots from GUI typing F10
    - saving boot.log in OS and preboot.log from GUI by typing F2
    MD5 (sym/Clover_v2k_r2654.pkg) = 80f96f117472a646c70be666dfd5a2e8

    958 downloads

    0 comments

    Submitted

  13. Clover v2k r2644

    Clover v2 is open source based on different projects: Clover, rEFIt, XNU, VirtualBox.
    The main is EDK2 latest revision. http://sourceforge.n.../cloverefiboot/
    Main features:
    - boot into 10.4 - 10.8 OSX, Windows EFI and Linux EFI
    - It's EFI bootloader provides RuntimeServices for OS that impossible for Legacy Bootloaders
    - mostly Clover do automatic detection of hardware and set all properties by default.
    But user can change them by config.plist
    - with Clover you may restart into other OS from Startup Disk prefPane
    - UUID written into config.plist will be the same as in OS
    - SMBIOS will be corrected to standard 2.6
    - ACPI will be corrected to standard 4.0.
    Custom DSDT will be loaded from booted partition or from EFI folder
    - customizable RestartFix and sleep/wake fixes and PCIRootUID value
    - Graphics Properties Injector for ATI, NVidia and Intel for wide range of supported cards.
    Also customizable.
    - USB fix (LegacyOff, Ownership, Builtin, clock-id) up to USB 3.0
    - HDA injector and Ethernet builtin injector
    - CPU turbo and P- and C-states generator
    - ACPI tables loading (SSDT-xx, APIC, BOOT, SLIC, SLIT, SRAT, UEFI...)
    - extra kexts loading and security mode for FireWire
    - default boot after timeout, customizable GUI , and saving screenshots from GUI typing F10
    - saving boot.log in OS and preboot.log from GUI by typing F2
    MD5 (sym/Clover_v2k_r2644.pkg) = 5019aa38e353f691a6eeb1dc640c929c

    593 downloads

    0 comments

    Submitted

  14. Clover v2k r2638

    Clover v2 is open source based on different projects: Clover, rEFIt, XNU, VirtualBox.
    The main is EDK2 latest revision. http://sourceforge.n.../cloverefiboot/
    Main features:
    - boot into 10.4 - 10.8 OSX, Windows EFI and Linux EFI
    - It's EFI bootloader provides RuntimeServices for OS that impossible for Legacy Bootloaders
    - mostly Clover do automatic detection of hardware and set all properties by default.
    But user can change them by config.plist
    - with Clover you may restart into other OS from Startup Disk prefPane
    - UUID written into config.plist will be the same as in OS
    - SMBIOS will be corrected to standard 2.6
    - ACPI will be corrected to standard 4.0.
    Custom DSDT will be loaded from booted partition or from EFI folder
    - customizable RestartFix and sleep/wake fixes and PCIRootUID value
    - Graphics Properties Injector for ATI, NVidia and Intel for wide range of supported cards.
    Also customizable.
    - USB fix (LegacyOff, Ownership, Builtin, clock-id) up to USB 3.0
    - HDA injector and Ethernet builtin injector
    - CPU turbo and P- and C-states generator
    - ACPI tables loading (SSDT-xx, APIC, BOOT, SLIC, SLIT, SRAT, UEFI...)
    - extra kexts loading and security mode for FireWire
    - default boot after timeout, customizable GUI , and saving screenshots from GUI typing F10
    - saving boot.log in OS and preboot.log from GUI by typing F2
    MD5 (sym/Clover_v2k_r2638.pkg) = 0244e9e6bd990d5a7bb591c3027467bc

    399 downloads

    0 comments

    Submitted

  15. Clover v2k r2637

    Clover v2 is open source based on different projects: Clover, rEFIt, XNU, VirtualBox.
    The main is EDK2 latest revision. http://sourceforge.n.../cloverefiboot/

    Main features:
    - boot into 10.4 - 10.8 OSX, Windows EFI and Linux EFI
    - It's EFI bootloader provides RuntimeServices for OS that impossible for Legacy Bootloaders
    - mostly Clover do automatic detection of hardware and set all properties by default.
    But user can change them by config.plist
    - with Clover you may restart into other OS from Startup Disk prefPane
    - UUID written into config.plist will be the same as in OS
    - SMBIOS will be corrected to standard 2.6
    - ACPI will be corrected to standard 4.0.
    Custom DSDT will be loaded from booted partition or from EFI folder
    - customizable RestartFix and sleep/wake fixes and PCIRootUID value
    - Graphics Properties Injector for ATI, NVidia and Intel for wide range of supported cards.
    Also customizable.
    - USB fix (LegacyOff, Ownership, Builtin, clock-id) up to USB 3.0
    - HDA injector and Ethernet builtin injector
    - CPU turbo and P- and C-states generator
    - ACPI tables loading (SSDT-xx, APIC, BOOT, SLIC, SLIT, SRAT, UEFI...)
    - extra kexts loading and security mode for FireWire
    - default boot after timeout, customizable GUI , and saving screenshots from GUI typing F10
    - saving boot.log in OS and preboot.log from GUI by typing F2

    MD5 (sym/Clover_v2k_r2637.pkg) = ac439ae2ce69e20dec6569fe5c6db250

    580 downloads

    2 comments

    Submitted

  16. ATI Radeon HD 6770 (OS X 10.9)

    I've patched the following kexts from OS X Mavericks for use with the ATI Radeon HD 6770:
    AMD5000Controller
    AMD6000Controller
    AMDRadeonX3000

    Install to /System/Library/Extensions, repair permissions, then reboot!

    1,564 downloads

    7 comments

    Updated

  17. Clover v2k r2627

    Clover v2 is open source based on different projects: Clover, rEFIt, XNU, VirtualBox.
    The main is EDK2 latest revision. http://sourceforge.net/projects/cloverefiboot/

    Main features:
    - boot into 10.4 - 10.8 OSX, Windows EFI and Linux EFI
    - It's EFI bootloader provides RuntimeServices for OS that impossible for Legacy Bootloaders
    - mostly Clover do automatic detection of hardware and set all properties by default.
    But user can change them by config.plist
    - with Clover you may restart into other OS from Startup Disk prefPane
    - UUID written into config.plist will be the same as in OS
    - SMBIOS will be corrected to standard 2.6
    - ACPI will be corrected to standard 4.0.
    Custom DSDT will be loaded from booted partition or from EFI folder
    - customizable RestartFix and sleep/wake fixes and PCIRootUID value
    - Graphics Properties Injector for ATI, NVidia and Intel for wide range of supported cards.
    Also customizable.
    - USB fix (LegacyOff, Ownership, Builtin, clock-id) up to USB 3.0
    - HDA injector and Ethernet builtin injector
    - CPU turbo and P- and C-states generator
    - ACPI tables loading (SSDT-xx, APIC, BOOT, SLIC, SLIT, SRAT, UEFI...)
    - extra kexts loading and security mode for FireWire
    - default boot after timeout, customizable GUI , and saving screenshots from GUI typing F10
    - saving boot.log in OS and preboot.log from GUI by typing F2

    MD5 (sym/Clover_v2k_r2627.pkg) = a5a3fe6f00b1b39311975ecfec39aef1

    570 downloads

    0 comments

    Submitted

  18. Clover v2k r2617

    Clover v2 is open source based on different projects: Clover, rEFIt, XNU, VirtualBox.
    The main is EDK2 latest revision. http://sourceforge.n.../cloverefiboot/

    Main features:
    - boot into 10.4 - 10.8 OSX, Windows EFI and Linux EFI
    - It's EFI bootloader provides RuntimeServices for OS that impossible for Legacy Bootloaders
    - mostly Clover do automatic detection of hardware and set all properties by default.
    But user can change them by config.plist
    - with Clover you may restart into other OS from Startup Disk prefPane
    - UUID written into config.plist will be the same as in OS
    - SMBIOS will be corrected to standard 2.6
    - ACPI will be corrected to standard 4.0.
    Custom DSDT will be loaded from booted partition or from EFI folder
    - customizable RestartFix and sleep/wake fixes and PCIRootUID value
    - Graphics Properties Injector for ATI, NVidia and Intel for wide range of supported cards.
    Also customizable.
    - USB fix (LegacyOff, Ownership, Builtin, clock-id) up to USB 3.0
    - HDA injector and Ethernet builtin injector
    - CPU turbo and P- and C-states generator
    - ACPI tables loading (SSDT-xx, APIC, BOOT, SLIC, SLIT, SRAT, UEFI...)
    - extra kexts loading and security mode for FireWire
    - default boot after timeout, customizable GUI , and saving screenshots from GUI typing F10
    - saving boot.log in OS and preboot.log from GUI by typing F2

    MD5 (sym/Clover_v2k_r2617.pkg) = a93e07d2738faf81fbb90bf054706e44

    191 downloads

    1 comment

    Submitted

  19. Clover v2k r2611

    Clover v2 is open source based on different projects: Clover, rEFIt, XNU, VirtualBox.
    The main is EDK2 latest revision. http://sourceforge.n.../cloverefiboot/

    Main features:
    - boot into 10.4 - 10.8 OSX, Windows EFI and Linux EFI
    - It's EFI bootloader provides RuntimeServices for OS that impossible for Legacy Bootloaders
    - mostly Clover do automatic detection of hardware and set all properties by default.
    But user can change them by config.plist
    - with Clover you may restart into other OS from Startup Disk prefPane
    - UUID written into config.plist will be the same as in OS
    - SMBIOS will be corrected to standard 2.6
    - ACPI will be corrected to standard 4.0.
    Custom DSDT will be loaded from booted partition or from EFI folder
    - customizable RestartFix and sleep/wake fixes and PCIRootUID value
    - Graphics Properties Injector for ATI, NVidia and Intel for wide range of supported cards.
    Also customizable.
    - USB fix (LegacyOff, Ownership, Builtin, clock-id) up to USB 3.0
    - HDA injector and Ethernet builtin injector
    - CPU turbo and P- and C-states generator
    - ACPI tables loading (SSDT-xx, APIC, BOOT, SLIC, SLIT, SRAT, UEFI...)
    - extra kexts loading and security mode for FireWire
    - default boot after timeout, customizable GUI , and saving screenshots from GUI typing F10
    - saving boot.log in OS and preboot.log from GUI by typing F2

    MD5 (sym/Clover_v2k_r2611.pkg) = 907eac2881332b521e16309866f9fdab

    163 downloads

    0 comments

    Submitted

  20. Clover v2k r2602

    Clover v2 is open source based on different projects: Clover, rEFIt, XNU, VirtualBox.
    The main is EDK2 latest revision. http://sourceforge.net/projects/cloverefiboot/

    Main features:
    - boot into 10.4 - 10.8 OSX, Windows EFI and Linux EFI
    - It's EFI bootloader provides RuntimeServices for OS that impossible for Legacy Bootloaders
    - mostly Clover do automatic detection of hardware and set all properties by default.
    But user can change them by config.plist
    - with Clover you may restart into other OS from Startup Disk prefPane
    - UUID written into config.plist will be the same as in OS
    - SMBIOS will be corrected to standard 2.6
    - ACPI will be corrected to standard 4.0.
    Custom DSDT will be loaded from booted partition or from EFI folder
    - customizable RestartFix and sleep/wake fixes and PCIRootUID value
    - Graphics Properties Injector for ATI, NVidia and Intel for wide range of supported cards.
    Also customizable.
    - USB fix (LegacyOff, Ownership, Builtin, clock-id) up to USB 3.0
    - HDA injector and Ethernet builtin injector
    - CPU turbo and P- and C-states generator
    - ACPI tables loading (SSDT-xx, APIC, BOOT, SLIC, SLIT, SRAT, UEFI...)
    - extra kexts loading and security mode for FireWire
    - default boot after timeout, customizable GUI , and saving screenshots from GUI typing F10
    - saving boot.log in OS and preboot.log from GUI by typing F2

    MD5 = 2628707a88495951ccd6561dd4740835

    90 downloads

    0 comments

    Submitted

  21. Clover v2k r2590

    Clover v2 is open source based on different projects: Clover, rEFIt, XNU, VirtualBox.
    The main is EDK2 latest revision. http://sourceforge.n.../cloverefiboot/

    Main features:
    - boot into 10.4 - 10.8 OSX, Windows EFI and Linux EFI
    - It's EFI bootloader provides RuntimeServices for OS that impossible for Legacy Bootloaders
    - mostly Clover do automatic detection of hardware and set all properties by default.
    But user can change them by config.plist
    - with Clover you may restart into other OS from Startup Disk prefPane
    - UUID written into config.plist will be the same as in OS
    - SMBIOS will be corrected to standard 2.6
    - ACPI will be corrected to standard 4.0.
    Custom DSDT will be loaded from booted partition or from EFI folder
    - customizable RestartFix and sleep/wake fixes and PCIRootUID value
    - Graphics Properties Injector for ATI, NVidia and Intel for wide range of supported cards.
    Also customizable.
    - USB fix (LegacyOff, Ownership, Builtin, clock-id) up to USB 3.0
    - HDA injector and Ethernet builtin injector
    - CPU turbo and P- and C-states generator
    - ACPI tables loading (SSDT-xx, APIC, BOOT, SLIC, SLIT, SRAT, UEFI...)
    - extra kexts loading and security mode for FireWire
    - default boot after timeout, customizable GUI , and saving screenshots from GUI typing F10
    - saving boot.log in OS and preboot.log from GUI by typing F2

    MD5 = a616f37f000b4fbf3969c758f5db7192

    124 downloads

    0 comments

    Submitted

  22. AppleACPIPlatform 10.8.1 Rollback

    For people who get stuck at "DSMOS has Arrived" and have tried everything.

    264 downloads

    0 comments

    Submitted

  23. Clover v2k r2586

    Clover v2 is open source based on different projects: Clover, rEFIt, XNU, VirtualBox.
    The main is EDK2 latest revision. http://sourceforge.n.../cloverefiboot/

    Main features:
    - boot into 10.4 - 10.8 OSX, Windows EFI and Linux EFI
    - It's EFI bootloader provides RuntimeServices for OS that impossible for Legacy Bootloaders
    - mostly Clover do automatic detection of hardware and set all properties by default.
    But user can change them by config.plist
    - with Clover you may restart into other OS from Startup Disk prefPane
    - UUID written into config.plist will be the same as in OS
    - SMBIOS will be corrected to standard 2.6
    - ACPI will be corrected to standard 4.0.
    Custom DSDT will be loaded from booted partition or from EFI folder
    - customizable RestartFix and sleep/wake fixes and PCIRootUID value
    - Graphics Properties Injector for ATI, NVidia and Intel for wide range of supported cards.
    Also customizable.
    - USB fix (LegacyOff, Ownership, Builtin, clock-id) up to USB 3.0
    - HDA injector and Ethernet builtin injector
    - CPU turbo and P- and C-states generator
    - ACPI tables loading (SSDT-xx, APIC, BOOT, SLIC, SLIT, SRAT, UEFI...)
    - extra kexts loading and security mode for FireWire
    - default boot after timeout, customizable GUI , and saving screenshots from GUI typing F10
    - saving boot.log in OS and preboot.log from GUI by typing F2

    MD5 = e27331b6f908acbabcd9d30f2164a512

    99 downloads

    0 comments

    Submitted

  24. Clover v2k r2581

    Clover v2 is open source based on different projects: Clover, rEFIt, XNU, VirtualBox.
    The main is EDK2 latest revision. http://sourceforge.n.../cloverefiboot/

    Main features:
    - boot into 10.4 - 10.8 OSX, Windows EFI and Linux EFI
    - It's EFI bootloader provides RuntimeServices for OS that impossible for Legacy Bootloaders
    - mostly Clover do automatic detection of hardware and set all properties by default.
    But user can change them by config.plist
    - with Clover you may restart into other OS from Startup Disk prefPane
    - UUID written into config.plist will be the same as in OS
    - SMBIOS will be corrected to standard 2.6
    - ACPI will be corrected to standard 4.0.
    Custom DSDT will be loaded from booted partition or from EFI folder
    - customizable RestartFix and sleep/wake fixes and PCIRootUID value
    - Graphics Properties Injector for ATI, NVidia and Intel for wide range of supported cards.
    Also customizable.
    - USB fix (LegacyOff, Ownership, Builtin, clock-id) up to USB 3.0
    - HDA injector and Ethernet builtin injector
    - CPU turbo and P- and C-states generator
    - ACPI tables loading (SSDT-xx, APIC, BOOT, SLIC, SLIT, SRAT, UEFI...)
    - extra kexts loading and security mode for FireWire
    - default boot after timeout, customizable GUI , and saving screenshots from GUI typing F10
    - saving boot.log in OS and preboot.log from GUI by typing F2

    MD5 = 068fcf7034d43ec675c2f20454532855

    268 downloads

    0 comments

    Submitted

  25. Clover v2k r2574

    Clover v2 is open source based on different projects: Clover, rEFIt, XNU, VirtualBox.
    The main is EDK2 latest revision. http://sourceforge.n.../cloverefiboot/

    Main features:
    - boot into 10.4 - 10.8 OSX, Windows EFI and Linux EFI
    - It's EFI bootloader provides RuntimeServices for OS that impossible for Legacy Bootloaders
    - mostly Clover do automatic detection of hardware and set all properties by default.
    But user can change them by config.plist
    - with Clover you may restart into other OS from Startup Disk prefPane
    - UUID written into config.plist will be the same as in OS
    - SMBIOS will be corrected to standard 2.6
    - ACPI will be corrected to standard 4.0.
    Custom DSDT will be loaded from booted partition or from EFI folder
    - customizable RestartFix and sleep/wake fixes and PCIRootUID value
    - Graphics Properties Injector for ATI, NVidia and Intel for wide range of supported cards.
    Also customizable.
    - USB fix (LegacyOff, Ownership, Builtin, clock-id) up to USB 3.0
    - HDA injector and Ethernet builtin injector
    - CPU turbo and P- and C-states generator
    - ACPI tables loading (SSDT-xx, APIC, BOOT, SLIC, SLIT, SRAT, UEFI...)
    - extra kexts loading and security mode for FireWire
    - default boot after timeout, customizable GUI , and saving screenshots from GUI typing F10
    - saving boot.log in OS and preboot.log from GUI by typing F2

    MD5 = 08caee0267c6927920680321d61ccb60

    156 downloads

    0 comments

    Submitted

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.