Jump to content

Source_Code_Bcl

Members
  • Content Count

    17
  • Donations

    $0.00 
  • Joined

  • Last visited

About Source_Code_Bcl

  • Rank
    Junior Member
  1. ? Well, I replaced the extra folder from USB with your extra folder. I decided to reinstall from USB with the new extra folder. ? Using -v only, the installer stucks before the language selection window, on a dark grey screen and lagging cursor working normally.Using -v + cpus=1, the installer worked normally, and I could complete the installation. (I have erased the hard disk to do a full clean installation).Booting on the hard drive freshly installed using only -v, the mac os stucks on a grey screen with lagging cursor working normally. Wont opens any window. Booting on the hard drive freshly installed using cpus=1 + -v, the mac os stucks on a white screen, without cursor or anything movable. Fully stucks. ? Remembering that the myhack asks to install generic extras on the end of install, as well as asking to remove some extras (that usually I press "yes" for all).
  2. ? Sorry my ignorance, but how can I do it?
  3. ? Here is the DSDT and SSDT:?https://mega.co.nz/#F!NhdxAZKS!mAetl2-oFgPyFhCXLQwuPQ (it's a folder, download any file you need) ? Unfortunately, I don't have onboard video card, this DX79SI is a fully offboard motherboard. PciRootUID I didn't try, but UseKernelCache=No isn't the same as "-f" in lowercase? If yes, I tried and the results was this?http://i.imgur.com/ifoD8Gw.jpg.
  4. ? Dude, create a topic only yours... It's not cool to ask for help in other threads, ok? They will definitely help you in your own topic. ? ? ? The result was a little different, now presenting more detailed information. Below is what appeared to me on the screen. ? ? Remembering that before, the line "Kernel Requests Now Disabled" was the last information.
  5. Well, in order to advance the process, I decided to perform the installation even having to use the flag cpus=1 with npci=0x3000. There were no problems or errors during installation. When it all ended, booting from the hard drive, no matter which flag I use?(including combinations with -x), always hangs in the image below: ? ? Remembering that the chameleon is loading files dsdt.aml and SSDT.aml normally (I had written wrong in the last post, the two files were not uppercase, only SSDT). ? What to do now?
  6. Thanks for the quick reply, but... The problem persists. ? In fact, the two files "aml" were in lower case letter on Extra/ folder of USB stick, I put all in uppercase... But the result was the same. USBBusFix shows me a gray screen, and hangs shortly thereafter, and npci=0x3000 does not pass the language selection screen. Only with the cpus=1 I can run the installer normally. ? I want to remind again that my installation of Mac OS on HD was, somehow, corrupted. I'll need to perform this setup again to accomplish the boot from the hard drive. ? So, can I install with the flag cpus=1 and try to resolve only after I installed on the hard disk,?or do I need to solve before by the USB drive first?
  7. ? After over 1 year trying to make the hackintosh on my machine, following his guidance was the first time I had a positive result. But unfortunately has not solved the problem yet. Here we go:?I do not know if I did right, but as I've said before, I never did anything related kexts and much less related to the DSDT or SSDT (the latter had never even heard of). The steps I did, as I understood, were the following:?On Windows:?1. I downloaded AIDA64 v3.20. (Since version 4.00, theres no longer supports the ACPI function as shown in the video).2. I exported the files " acpi_dsdt.bin " and " acpi_ssdt.bin " .3. Renamed, still in the windows , the "acpi_dsdt.bin" to "DSDT.aml" and "acpi_ssdt.bin" to "ssdt.aml".4. Compress the files and I sent to my own email.?On Mac OS (remembering that it is a virtual machine within Windows):?1. I opened my email and downloaded the compressed file.2. I extracted the files on the desktop.3. Opened the pendrive with the installer myhack4. Opened the "Extra /" folder and edited the org.chameleon.boot.plist file, adding the 4 lines as you instructed.5. I copied the two files renamed (aml) from the desktop to the "Extra /" folder.??Well, the hard drive with the OS installed was somehow corrupted and I have to reinstall again. Thus, the only choice I had was to test directly booting the USB drive. All right with the flash drive, I checked the BIOS settings. I checked each of the options according to your orientation.?- Execute Disable bit: I did not find this option.- XD (if exists): I did not find this option.- Limit CPUID Max: I did not find this option.- Set all colors of the CPU active / enabled. Ok, all active cores.- Virtualization (if exists): I did not find this option.- Hyper-threading: I tried on and off, tell the details below.- HPET (High Precision Event Timer / PCH): active, ok.- SATA Mode: AHCI, OK- Set all the Overclock / Performance / Turbo etc. values ​​to Auto. Ok, all automatic.- Set the UEFI mode settings (if exists) to compatible mode - The UEFI settings were only "Enabled" and "Disabled". As default, it was as disabled, so kept.?I performed the boot from pendrive, and the results follow below:??-v USBBusFix=Yes -- Gray screen and hangs.?-v npci=0x3000 -- Opens the installer, but hangs at language selection.? ? I can select any language, but just can not click the continue button. I'm stuck on this screen. I can move the mouse cursor normally, it does not hangs. ? As an experiment, I decided to put the flag "cpus=1" with the "npci=0x3000". Result? I can pass this screen without problems, and the installer opens 2 times faster. But still I noticed that the WiFi in the upper right corner does not appear, so there is still a problem with the wireless network, and perhaps with other peripherals.?Another way to experiment, I disabled hyper-threading technology in the BIOS. I opened the installer without the flag "cpus=1", and without this technology, now the installer opens a gray screen with mouse cursor working normally, but even the language selection appears.?I have reactivated HT Technology.?Even going with these flags, as you said I have to get a way to open the operating system without the flag "cpus=1", I decided not to reinstall the system and wait for a response from you.?Since now, many many thanks. And I want to remind you that there has been progress on this computer that had never happened before, I feel that little remains to solve this problem.?Considerations:??I am very excited about the chance to run 100% Mac OS (most current) on my computer, which I try for more than 1 year to make it work. The proof of this was my first post on this site, since that day I try to make it work, and nothing. Your orientations made ​​me very excited. I await a response from you and I am ready to follow any orientations strictly in order to accomplish something that I currently consider to be a dream. In another forum, some have told me that my specs would be very difficult to do a hackintosh, but now I'm confident.
  8. ? Enabling GraphicsEnabler did not change anything. And -f -v NPCI=0x3000 cpus=1 still show me white screen. ? About the audio, could you explain me how I can do this procedure? ? ? I read about this flag "cpus=1", and I am aware of this. What I found strange is that someone once told me that my processor (i7 3960X) was fully supported from versions 10.8.x. In 10.9, I think it strange that I still need this flag.??Anyway, could you tell me how to perform the procedure of kext? Where and how to install it?
  9. First of all, sorry for spelling errors, my primary language is not English.? ? I'm trying to perform Hacintosh with Mac OS 10.9 by MyHack. I set up a Pen-drive into a VMWare virtual machine on a Mac OS X 10.9.1. Below are the specs of my computer: ? ? Motherboard: DX79SI Processor: Core i7 3960X - 3.30 ~ 3.90ghz (turbo boost) with 6 cores in HT (12 threads total) and 15MB L3 cache Memory: 16GB RAM (4x4Gb) DDR 3 1600mhz quad channel HD1: 96GB Kingston SSD HD2: Seagate 1TB Video Card: Sapphire ATI Radeon HD 6970 with 2GB memory Sound: Onboard; ALC842 ? I successfully boot from the USB drive and completes the installation, but only using the following command: ? -v -x NPCI=0x3000 cpus=1 GraphicsEnabler=No (works without -v too). Otherwise, there's no way that works. ? The installation took place perfectly, and then also could only enter the operating system using the same command. I performed the initial settings (language, user name, etc.) and could successfully enter the desktop Mac OS X. I believe that going through the boot and installation, would be the worst part, right? ? The point is that the following features are not working: ? - Graphic Acceleration; - Audio; - Wifi. ? And the most important is the graphics acceleration to the fluidity of the system. The resolution also came correct (1080p) and the system recognized my monitor (AOC 21.5 "). The detail is that this is a VGA monitor using a DVI> VGA adapter, and still recognized perfectly. I noticed that kexts for AMD are all the Extras folder (as AtiHD4, 5 and 6000). I do not know work with kexts, but I have a basic understanding of how it works. ? I believe there is a possibility of a problem with kexts. Only guess, if there is something else that can be (like DSDTs, something I read a little and I don't know too), I would like much of an support from you. In order to help, I'm sending a table of all combinations of all commands with the results that I have tried. ? ? Remembering that "Red LED in board" is the worst crash that can occur in this DX79SI. It lights a red LED on the side of the LCD display error code, and the system only restarts after holding the power button for 5 seconds, not even the reset button works in this state. ? Failures highlighted in yellow, except for self-reboots, the reset button works normally. ? The results that have marked with an Ok, Mac OS worked with the above restrictions. ? What can I do?
  10. ? Kyndder, não sei se ainda lembra de mim, sequer sei se ainda frequenta este fórum, mas estou aqui, firme e forte, tentando realizar este feito, agora seguindo seu conselho. ? Antes de qualquer coisa, peço desculpas à todos por ressuscitar este tópico, mas como continuo com praticamente o mesmo computador e mesmo problema, achei viável ressuscita-lo (trocadilhos à parte, hoje é ressurreição de cristo. Feliz Páscoa à todos!) ? Pois bem, as coisas estão um pouco diferentes agora. Minha VGA agora é uma Ati Radeon Sapphire HD 6970 de 2GB. Outro detalhe é que agora estou tentando realizar o hacintosh com o Mac OS 10.9. E por fim, eu fiz todo o processo do myhack por uma máquina virtual no VMWare de um Mac OS X 10.9.1, num Pen-Drive de 32GB. Consegui realizar o boot pelo pen-drive e a instalação, porém somente utilizando o seguinte comando: ? -v -x npci=0x3000 cpus=1 GraphicsEnabler=No (funciona sem o -v também). Fora isso, não tem jeito que funcione.?A instalação ocorreu perfeitamente, e em seguida, também só pude entrar no sistema operacional utilizando o mesmo comando. Realizei as configurações iniciais (idioma, nome de usuário, etc) e consegui entrar com sucesso na área de trabalho do Mac OS X. Creio que passar por isto seria a pior parte, correto??A questão é que estou sem os seguintes recursos:?- Aceleração Gráfica;- Audio;- Wifi.?Sendo o mais importante a aceleração gráfica para a fluidez do sistema. A resolução também veio correta (1080p), assim como o sistema reconheceu meu monitor (AOC de 21,5"). Detalhe que é um monitor VGA utilizando um adaptador DVI > VGA, e ainda assim reconheceu perfeitamente. Percebi que as kexts para AMD estão todas na pasta Extras (como AtiHD4, 5 e 6000). Não sei bem mexer em Kexts, mas tenho uma noção básica de como funciona.?Creio que com isso, os problemas que passei anteriormente, agora não sejam mais um problema grave. Acredito que seja problemas de kexts agora. Apenas acho, se existe alguma outra coisa que possa ser (como DSDTs, algo que li por alto e não sei mexer), gostaria muito de um auxílio por parte de vocês.?Para ajudar, estou enviando uma tabela de todos os comandos e seus resultados que tentei.??Lembrando que "Led vermelho da placa" é o pior travamento que pode ocorrer nessa DX79SI. Ela acende um led vermelho do lado do LCD indicador de código de erro, e o sistema só reinicia após segurar o botão de power por 5 segundos, nem mesmo o botão de reset funciona neste estado.?As falhas marcadas em amarelo, com exceção aos reboots automáticos, o botão reset funciona normalmente.?Os resultados que tiverem marcados com um Ok, o Mac OS funcionou com as restrições citadas acima.?O que posso fazer?
  11. Não ele da KP, acho que detonei alguma kext (testando um "driver" da placa-mãe que achei na internet)... Eu tenho uma imagem do VMWare aqui, mas não consigo DE JEITO NENHUM colocar pra ler pendrive Nem mesmo consigo copiar nenhum arquivo pra dentro do sistema... Seria uma alternativa dentro do windows!
  12. Kyndder, me dá uma luz! Eu consegui o Retail Mountain Lion.app mas tem um probleminha: Logo depois, fiz uma besteira que baguncei minha instalação do iAtkos. Terei que instalar tudo de novo do iAtkos pra fazer o processo pelo MyHack? Não existe nenhum meio pelo Windows?
  13. Ok. Eu posso utilizar uma imagem do Mountain Lion em dmg neste processo? Por mais seguro que seja o processo, quero ter certeza que vai funcionar testando antes de comprar.
  14. Muito obrigado pela resposta! Mas ainda não consegui entender bem a ideia. Lembrando que tudo foi muito rapido pra mim, ja que nunca havia feito um hackintosh antes... Bom, gostaria de entender como devo proceder. Pelo que li no link que você passou, parece que sugere que eu tenha que reinstalar todo o sistema de novo. Seria isso? Vou ter que montar um DVD de boot contendo este app myHack e uma imagem do Mountain Lion baixada via AppStore. Esta imagem do Mountain Lion pela AppStore é paga certo?
  15. Hi guys! I'm with the iATKOS L2 updated to version 10.7.5 and since I installed, I was never able to boot successfully without using the command arch=i386. Giving this command, the system is able to boot without errors, but with a lag is unbearable in the mouse and in the whole system. Recognizes the 16GB memory that I have, the 12 processor threads that I have the video and sound drivers, but gets a lag that is almost unusable. Now using the command arch=i386 combined with the cpus=1 command the system runs perfectly, it flows very well, but only using one core processing. I did a test by installing the game Counter Strike Global Offensive through Steam and got less than 5fps, apparently with the same lag that gave in the mouse. I installed the game UberStrike through AppStore and although much lighter, flowed very well in the system. I presume that the problem of CS: GO is the lack of the other cores, and I suppose that future problems with other games / programs occur due to use only one core. What should I do to get into the system without using the command arch=i386 cpus = 1 and? Or should I ask why should I use these two commands? At least the command cpus=1 I believe it is responsible for "castrating" the performance of my machine. Computer Settings: Motherboard: DX79SI Processor: Core i7 3960X - 3.30 ~ 3.90ghz (turbo boost) with 6 colors in HT (12 threads in total) and 15mb of L3 cache Memory: 16GB RAM (4x4Gb) DDR 3 1600mhz quad channel HD1: 96GB Kingston SSD HD2: Seagate 1TB Video card: GeForce GTX 560 with 1GB of memory Sound Card: Onboard; ALC842 (get work normally) Thank you all!
×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.