Jump to content

ALiveVam

Trusted Member
  • Content Count

    12
  • Donations

    $0.00 
  • Joined

  • Last visited

  • Days Won

    1

Posts posted by ALiveVam


  1. macOS Mojave was just released in 24th September 2018. This is the major release by an Apple because the UI of Mojave is completely dark.

    Requirements for this guide :

    • Intel based processor laptop/desktop
    • USB stick 8 GB or higher
    • A working mac or hackintosh
    • Internet Connection

     

    Preparation:

    Download macOS Mojave

     

    To get a working Mojave installer onto a USB flash drive it must first be formatted into a scheme that allows for an EFI Partition. Afterwards the the Mojave Installer is ready to be placed on the USB drive using is Terminal.

     

    Step 1: 

    Formatting the USB Drive.

    You can format the USB flash drive using two way:

    1. Disk Utility
    2. Terminal

    1.Disk Utility:

    **Insert Flash Drive

    **Open Disk Utility

    **Select the Flash Drive on the left column

    **Click Erase

     

    Set the following settings:

    • Name: Mojave Installer
    • Format: Mac OS Extended (Journaled)
    • Scheme: GUID Partition Map

    **Click Erase

    **Click Done upon finish.

     

    2.Terminal

    **Insert Flash Drive

    **Open Terminal

    And Type Following Command

    diskutil list

    Then

    # repartition /dev/disk1 GPT, one partition
    # EFI will be created automatically
    # second partition, "install_osx", HFS+J, remainder
    diskutil partitionDisk /dev/disk1 1 GPT HFS+J "install_osx" R

    Note:- In my case,my sub flash drive is /dev/disk1, You can check for available drive using command diskutil list

     

    Step 2: Transferring the Mojave Installer to usb flash drive via terminal.
    If you using Disk Utility method to Formatting the USB Drive,then using this command.
    In Terminal....
    First edit and replace Your USB Drive Name.

    sudo /Applications/Install\ macOS\ Mojave.app/Contents/Resources/createinstallmedia --volume /Volumes/Mojave Installer --applicationpath /Applications/Install\ macOS\ Mojave.app --nointeraction

    Then..

    After finishing the process.In Terminal [Recommended]

    sudo diskutil rename "Install macOS Mojave" Mojave Installer

    .......................................................................................................................................................

    **If you using Terminal method to Formatting the USB Drive,then using this command.
    In Terminal..

    sudo "/Applications/Install macOS Mojave.app/Contents/Resources/createinstallmedia" --volume  /Volumes/install_osx --nointeraction

    After finishing the process.In Terminal [Recommended]

    sudo diskutil rename "Install macOS Mojave" install_osx

    Step 3:

    Mount EFI Partition

    Step 4:

    Download Clover EFI Bootloader

    Step 5:

    Install Clover EFI Bootloader to usb flash drive.

    • Change Install Location and select your usb flash drive
    • select "Customize"
    • Check "Install for UEFI booting only", "Install Clover in the ESP" will automatically select
    • Check Themes
    • The defaults for Drivers64UEFI.efi are recommended

     

    Step 6:

    Moving Kext
    You need to download the kext which matches with your system and copy the kext to USB EFI  /EFI/EFI/Clover/Kexts/Other/

     

    Download:

    Replace your EFI with this modified EFI<<<<<

     

     


  2. Enable and Control Backlight | Brightness for Mojave 10.14.x

    If you use Mojave 10.14.x, follow this guide to enable and control Backlight | Brightness for laptop/desktop.

    NOTE: Before doing this you must need to Patch DSDT and SSDT
    kk.png.8886eed826003b1d2a51e5c4368c6565.png
     
     
    Requirement:
    We need 4 thing for enabling and Controlling Laptop Backlight|Brightness.
    1. A Patched SSDT-PNLF.aml
    2. AppleBacklightFixup.kext
    3. Lilu.kext
    4. WhateverGreen.kext

     

    Preparation:

    Download this following elements

    A Patched SSDT-PNLF.aml, AppleBacklightFixup.kext,Lilu.kext,WhateverGreen.kext

    For Backlight|Brightness.zip <<<<<

     

    Installation:
    *Mount EFI Partition....
    "Lilu.kext" and "WhateverGreen.kext" install to system/library or EFi/efi/clover/kext/Other
    "AppleBacklightFixup.kext" install to system/library or EFi/efi/clover/kext/Other
    "A Patched SSDT-PNLF.aml" install to EFi/efi/clover/Acpi/Patched

     

    After Install:

    Open Terminal and Paste this following command

    In Terminal

    sudo kextcache -i /

    After process is complete, then reboot.

     

    **If the Brightness | Backlight not working

    Open Terminal and paste this following command one by one.

    In Terminal....

    sudo chmod -R 755 /System/Library/Extensions/
    sudo chown -R root:wheel /System/Library/Extensions/
    sudo touch /System/Library/Extensions && sudo touch /Library/Extensions && sudo kextcache -u /

    After process is complete then Reboot.[Recommended]

     

    All Done...😊😉

     


  3. Every Hackintosh Laptops need DSDT.So you can request it here.

    How to request for DSDT/SSDT:

    Step 1: Reboot your laptop, when the clover screen is appear then press F4/Fn+F4 then boot.

     

    Step 2:

    Requirement:

    Download MaciASL and iasl.

    ..............................................................................................................................................................................

     

    Step 3:

    After Download MaciASL and iasl.....

    Open Terminal.......

    In Terminal, Paste following command and hit enter...

    cd ~/Downloads

    Then.....In Terminal, Paste following command and hit enter...

    sudo cp iasl /usr/bin/
    sudo cp /usr/bin/iasl /Applications/MaciASL.app/Contents/MacOS/iasl61

    ............................................................................................................................................................................................................................

    Then Mount EFI Partition.....

    After Mount EFI Partition again in Terminal.....

    cp -R /Volumes/EFI/EFI/Clover/ACPI/origin ~/Desktop

    You see the Origin folder in desktop....

    Then again in Terminal.....

    Paste following command and hit enter...

    cd ~/Desktop/origin/
    ls

     

    Then, copy all the following text...

    External(MDBG, MethodObj, 1)
    External(_GPE.MMTB, MethodObj, 0)
    External(_SB.PCI0.LPCB.H_EC.ECWT, MethodObj, 2)
    External(_SB.PCI0.LPCB.H_EC.ECRD, MethodObj, 1)
    External(_SB.PCI0.LPCB.H_EC.ECMD, MethodObj, 1)
    External(_SB.PCI0.PEG0.PEGP.SGPO, MethodObj, 2)
    External(_SB.PCI0.GFX0.DD02._BCM, MethodObj, 1)
    External(_SB.PCI0.SAT0.SDSM, MethodObj, 4)
    External(_GPE.VHOV, MethodObj, 3)
    External(_SB.PCI0.XHC.RHUB.TPLD, MethodObj, 2)

     

    Then type the following text in Terminal..Don't copy/paste..

    and hit enter...

    pbpaste>refs.txt

     

    Then dissambled DSDT/SSDT with this command...

    Paste following command and hit enter...

    iasl -da -dl -fe refs.txt DSDT.aml SSDT*.aml

     If you get error then try this command....

    Paste following command and hit enter...

    iasl -dl -fe refs.txt DSDT.aml SSDT*.aml

    ..............................................................................................................................................................................

    If you have Dual GPU. ex: amd+intel/intel+Nvidia......

    Apply this command in Terminal....

    ***If Don't have DGPU, no need this command.

    grep -l Method.*_OFF *.dsl
    grep -l Method.*_INI *.dsl

    ..............................................................................................................................................................................

    Attachment for DSDT Patch:

    After all is done, then

    1. Attach "Origin" folder from your desktop.
    2. Attach Clover folder without theme folder. 
    3. Attach All Terminal Output
    4. Attach laptop full specification.

  4. Why Need This: macOS Mojave 10.14.x requires a patch to raise the USB port limit. If you want to be able to use all your USB ports and USB 3.0 speeds you will need this patch.
    You can use 3.0 USB flash drive with 3.0 full speed.

     

    Instruction:

    1.Go To Efi/efi/clove config.plist

    2.Open config.plist with clover configurator or plist editor pro

    3.Go to config.plist/Kernel and Kext Patches/kextsTopatch

    4.Select the “+”/Add

    Then Copy and Paste Following Line:

     

    • Name*: com.apple.driver.usb.AppleUSBXHCI
    • Find* [Hex]: 83FB0F0F 83030500 00
    • Replace* [Hex] : 83FB0F90 90909090 90
    • Comment: USB 10.13.4+ by PMHeart
    • Save config.plist

     

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.