Jump to content

ariksaja

Members
  • Content Count

    56
  • Joined

  • Last visited

  1. ariksaja

    ASUS P5GC-MX/1333 WORKS 100% PACKAGE

    apparently... i also had problem usb hi speed sometimes working and sometimes not working. intro : ariks-Mac-Pro:~ arik$ system_profiler SPUSBDataTypeUSB:USB Bus:Host Controller Location: Built-in USBHost Controller Driver: AppleUSBUHCIPCI Device ID: 0x27ca PCI Revision ID: 0x0001 PCI Vendor ID: 0x8086 Bus Number: 0x5d External HDD :Capacity: 80.03 GB (80,026,361,856 bytes)Removable Media: YesDetachable Drive: YesBSD Name: disk1Product ID: 0x0704Vendor ID: 0x1058 (Western Digital Technologies, Inc.)Version: 1.05Serial Number: 444C30584B4A353158374D20Speed: Up to 12 Mb/secManufacturer: Western Digital Location ID: 0x5d200000 / 2Current Available (mA): 500Current Required (mA): 2Partition Map Type: GPT (GUID Partition Table)S.M.A.R.T. status: Not SupportedVolumes:====cut here==== and strangely, sometimes i got this ariks-Mac-Pro:~ arik$ system_profiler SPUSBDataTypeUSB:USB Bus:Host Controller Location: Built-in USBHost Controller Driver: AppleUSBUHCIPCI Device ID: 0x27c9 PCI Revision ID: 0x0001 PCI Vendor ID: 0x8086 Bus Number: 0x3d USB High-Speed Bus:Host Controller Location: Built-in USBHost Controller Driver: AppleUSBEHCIPCI Device ID: 0x27cc PCI Revision ID: 0x0001 PCI Vendor ID: 0x8086 Bus Number: 0xfd External HDD :Capacity: 80.03 GB (80,026,361,856 bytes)Removable Media: YesDetachable Drive: YesBSD Name: disk1Product ID: 0x0704Vendor ID: 0x1058 (Western Digital Technologies, Inc.)Version: 1.05Serial Number: 444C30584B4A353158374D20Speed: Up to 480 Mb/secManufacturer: Western Digital Location ID: 0xfd500000 / 5Current Available (mA): 500Current Required (mA): 2Partition Map Type: GPT (GUID Partition Table)S.M.A.R.T. status: Not Supported===cut here=== from that log, i can see there are the difference when it loads, especially what i marked as red from that log.preview the difference.usbfullspeed.jpgusbhispeed.jpgi already tried many ways, including to make bios setting the same like you. but still i got it sometimes working or not. do you have a clue about this?
  2. nice may be you can write your own step based on that link to share with all people here. you can put reference and you can write what step will working for you. congrats
  3. i don't have ati radeon 4330 , but there are people had succeed. try this link Mobility Radeon - 10.6.6/7 guide for QE/CI - testing 10.7 - InsanelyMac Forum
  4. ariksaja

    x4500 with Quartz Extreme/GL backlight fixed

    anyway, i need to make it support in 1280x800x32 , do you think i have to change in binary? which binary should i edit if it say so?
  5. ariksaja

    x4500 with Quartz Extreme/GL backlight fixed

    this is better for me and my battery is not drain fast as usual because fixed backlight. still, even i run that to enable quartz, apparently its not running for me...
  6. ariksaja

    IntelGMA 4500MHD QUARTZ EXTREME

    doesn't work.
  7. #1. Tested on Lion Retail 10.7.2 I just try re-attach my ATI HD 4350 , but i think i'm too lazy to use Kexts such as ATY_Init.kext, Patch Kexts, in my case, you will all know it as 4350Fix2.kext well, since chimera has built in mode that we can use, i just found out how to make this card working without using any kext. Thanks to Chimera Developer i guess... so here's how to make it. Pre-beginning : based on help in chimera or chameleon with ? command on boot prompt : Press Enter to start up Darwin/x86 with no options, or you can: Type -v and press Enter to start up with diagnostic messages Type ? and press Enter to learn about advanced startup options boot: The boot: prompt waits for you to type advanced startup options. If you don't type anything, the computer continues starting up normally. It uses the kernel and configuration files on the startup device, which it also uses as the root device. Advanced startup options use the following syntax: ===cut=== GraphicsEnabler=Yes|No Automatic device-properties generation for gfx cards. AtiConfig=<cardcfg> Use a different card config, e.g. AtiConfig=Megalodon. AtiPorts=<value> Specify the number of ports, e.g. AtiPorts=2. UseAtiROM=Yes|No Use an alternate Ati ROM image ===cut=== What do you need : Chimera *still not testing it with latest chameleon, may be you guys can try it out. modify org.chameleon.Boot.plist *it lays on /Extra/ folder by default. Advantages : [*]no need patched kext [*]Keep system as clean as possible [*]You all can use 32/64 bit mode, since you were using original unmodified kexts. [*]No need input your PCI ID e.g.: 954f into corresponding kexts. which usually do the trick for us. [*]No need to use Graphics Enabler to Yes , although, if you use GE=Yes, it's still working [*]All ports is working without a doubt (VGA/DVI/HDMI) [*]No more has to use DVI port, you can freely choose what port without limitation. Okay, after you installed Chimera, now let's make it work by modifying your custom boot.plist . here's what you need to input into your plist <key>AtiConfig</key> <string>Motmot</string> or <string>Gliff</string> *use and pick one of them , neither Motmot or Gliff <key>AtiPorts</key> <string>1</string> optional : <key>UseAtiROM</key> <string>Yes</string> so, the result, i will use my own bootplist to be an example, don't just copy paste my setting, because it depends on your hardware and different hardware may not work. sample : <?xml version="1.0" encoding="UTF-8"?> <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd"> <plist version="1.0"> <dict> <key>AtiConfig</key> <string>Gliff</string> <key>AtiPorts</key> <string>1</string> <key>CSTUsingSystemIO</key> <string>Yes</string> <key>DSDT</key> <string>/Extra/DSDT.aml</string> <key>EnableC2State</key> <string>Yes</string> <key>EthernetBuiltIn</key> <string>Yes</string> <key>GUI</key> <string>No</string> <key>GenerateCStates</key> <string>Yes</string> <key>GeneratePStates</key> <string>Yes</string> <key>Graphics Mode</key> <string>1280x800x32</string> <key>Kernel</key> <string>mach_kernel</string> <key>Kernel Flags</key> <string>-v npci=0x2000 darkwake=0</string> <key>Legacy Logo</key> <string>Yes</string> <key>SMBIOS</key> <string>/Extra/SMBios.plist</string> <key>SystemType</key> <string>3</string> <key>Theme</key> <string></string> <key>Timeout</key> <string>1</string> <key>UseAtiROM</key> <string>Yes</string> <key>VBIOS</key> <string>Yes</string> <key>arch</key> <string>i386</string> </dict> </plist> I put that <key>UseAtiROM</key>as an optional, because when i testing it , without put that flag i still can make my card working, i don't know if it's can make another ATI/AMD Graphics card will working, well perhaps all you can try it using this simpler method. without finding proper patched kext. well, in kernel message while booting, it's shows error when loading ATIRadeonX2000, but still, it's loaded though ariks-Mac-Pro:~ arik$ sudo dmesg | grep ATI Kext com.apple.ATIRadeonX2000 - library kext com.apple.iokit.IOGraphicsFamily not found. Can't load kext com.apple.ATIRadeonX2000 - failed to resolve library dependencies. Kext com.apple.ATIRadeonX2000 failed to load (0xdc00800e). Failed to load kext com.apple.ATIRadeonX2000 (error 0xdc00800e). Kext com.apple.driver.AppleHDAController - library kext com.apple.iokit.IOGraphicsFamily not found.Couldn't alloc class "ATIRadeonX2000" well, at least the card is working now . so far i still try it with lion, will do trial on Snow Leopard soon. that's why i name this thread as #1 Preview: note: to test it, i'm not using kernel cache so it would be scanning all drivers first while booting, you may try using kextcache if you want. may be, you can also try it using chameleon edition not chimera, i personally only testing it with chimera.
  8. kyndder, have you ever try to make it work using NVIDIA Rom that we extract ? or are we suppose to be use that rom to generate EFI String? which means we can't use the rom that we extract directly without using EFI or GE? you can try using retail mac osx dvd, not using iAtkos or another pirated macosx. i'm sure the result would be different, since it's use original driver. I'm not using pirated one,FYI
  9. neither do i, i never know they can be work at the same time. hahaha. well its just testing . hmm apparently, i use one card and all ports at the same time. i rarely use DVI port even if it's working or not. i like vga port because it's not make me too busy plugged another thing on cpu.. also i think using dvi converter is a little bit slow , it shows when powering up cpu. (i don't know if its because my old mb) hihihi perhaps yup, something automatically blocking device to display, or maybe because i'm not using real DVI device, but actually VGA using DVI-VGA converter. theoretically, converter translating dvi output into vga output. that's why perhaps i can't use 3 monitor at the same time
  10. hahaha, anyway, now i just testing using my LG TV, and another LG monitor for pc. i use dvi to vga connector for my LG monitor, and hdmi using for LG TV. apparently, it's only supported dual monitor though, even if i plugged it all, only 2 display will shown, if i plugged off dvi , i can see hdmi tv connection working now. if i plugged in dvi again, tv will off and dvi will work. hahaha....
  11. anyway, i curious, can we use triple monitor instead of dual on mac osx? hihihhi since nowadays we have hdmi, vga and dvi ports.. hihihi
  12. well, i found that chimera 1.6.0 is not stable for me and buggy.. so i use chimera first edition that works stable for me ariks-Mac-Pro:~ arik$ bdmesg Chameleon 1.5.4 (svn-r1394) [2011-09-07 17:13:31]
  13. ariksaja

    System Info

    i love this tools ... big salut to you old napalm. i also like your tools to auto patch dsdt in your sites. regards
  14. ariksaja

    [TIPS]Kexts and DeviceID`s

    nice guide, though with the fact of macosx, i curious why this mac osx sometimes, even we didn't inject our hardware id sometimes it's loaded perfectly ? still this tutorial could make me refresh and try with this method if i had the problem again. thumbs up dude
×