Jump to content
  • 0
be-clear

New to Hackintosh

Question

Hi! I'm a complete newbee, so I apologize if I got my perceptions wrong about what I've been reading for the past week or so, which, I MUST say, has rendered me more confused than illuminated. I understand that after a successful install of - in my case - of Yosemite using a Yosemite.zone USB install, I end up with a crippled laptop but basically working. I assume that I have no native DSDT nor SSDT files sitting in their respective directories - because I have looked for them and they are nowhere to be found - and I'm still unclear as to where my Hackintosh is booting from. Below I've attached a text file containing my TOSHIBA S855 Satellite laptop's specs.
I have managed to find a very important kext file to activate my AMD Radeon 7600 graphics card. The installed/running vanilla VGA driver gives me only 1024 x 768 resolution and flashes constantly, making typing and/or reading very frustrating and difficult. Also, the window's control buttons and bar get obscured or completely disappear frequently, adding to the frustration.
I have managed to EXTRACT A CLEAN DSDT.aml file from the same laptop, in a Windows 7 environment, which I managed to clean up until it compiles ok. I've also attached the clean - .asl - text version of this, prior to compilation.

I still have several devices that aren't recognized, such as bluetooth, card reader, wi-fi, sound, USB2.0 (3.0 works). I feel lucky that most devices other people have problems with, work in my case, such as sleep, battery, cpu, touchpad, DVD, etc.

 

Now the questions are:

 

1 - Will this compiled DSDT.AML file still need further tweaking with additional patches (kext files)? I seem to believe that is the case from posts I've read from other users attempting similar results with their hardware.

2 - Assuming I have successfully patched and compiled this dsdt.aml file, how do I go about placing it, and its counterpart SSDT.aml, where they are expected by the OS to boot? 

3 - I followed the instructions attached to the Radeon kext, using the attached tools, to patch the (I assume) existing dsdt file, and the substitution of and existing AMD 7600 kext in some system folder. I took the chance to reboot, expecting the laptop to use the new kext, but nothing happened, luckily!

4 - I used DiskUtility to be able to locate the supposedly existing EFI (UEFI?) partition where one of these files reside, to no avail. Is such partition created using the above USB install?

5 - If that is not the case, do I need such partition?

6 - If answer to 6 is YES, how do I create it without disturbing my existing setup?

7 - Does the Mac not check for installed hardware during installation of the OS, just like Windows does?

8 - I've seen some non-Mac supported devices' kext files - like AMD for graphics and sound in some system folders. Am I right to assume this is the good work of the people who customized the install tools?

9 - If answer to 7 is yes, then, why does the Mac not detect the non-supported hardware with the ADDED kext files I just mentioned?

 

As you all can see, I'm completely baffled by all this, and would certainly appreciate any help some good samaritan may bring forth.

Thanks! I look forward to receiving some replies.

 

toshibas855specs.txt

revised dsdt.adsl

Share this post


Link to post
Share on other sites

3 answers to this question

Recommended Posts

  • 0

Hi be-clear!

Nice work so far, an Ivy Bridge HD4000 laptop should make a good hackintosh.

The flashing screen does indicate that your GPU is not picked up correctly by OS X.

Be sure to use only one GPU while OS X is set up, OS X can not switch graphics on non Apple hardware.

If you can, disable your discrete Radeon 7600 in BIOS.

I would go that way using solely your HD4000 for now. It may be possible to use your Radeon 7600 later with a custom DSDT, but I´m not into that.

 

In case you did not see this, maybe this VAIO guide can give you some idea: http://www.insanelymac.com/forum/topic/309549-el-capitan-uefi-clover-on-sony-vaio-s/

 

In general, OS X does indeed look for hardware, but only for Apple hardware.

Todays Macs use a GPT partition scheme with a hidden EFI (Fat32) partition of 200MB or so.

If you want to look at its content, proceed as pointed out in the attached .rtf please.

 

Best wishes!

 

Mount EFI.rtfd.zip

Share this post


Link to post
Share on other sites
  • 0
On 01/04/2016 at 6:38 PM, noway said:

Hi be-clear!

Nice work so far, an Ivy Bridge HD4000 laptop should make a good hackintosh.

The flashing screen does indicate that your GPU is not picked up correctly by OS X.

Be sure to use only one GPU while OS X is set up, OS X can not switch graphics on non Apple hardware.

If you can, disable your discrete Radeon 7600 in BIOS.

I would go that way using solely your HD4000 for now. It may be possible to use your Radeon 7600 later with a custom DSDT, but I´m not into that.

 

In case you did not see this, maybe this VAIO guide can give you some idea: http://www.insanelymac.com/forum/topic/309549-el-capitan-uefi-clover-on-sony-vaio-s/

 

In general, OS X does indeed look for hardware, but only for Apple hardware.

Todays Macs use a GPT partition scheme with a hidden EFI (Fat32) partition of 200MB or so.

If you want to look at its content, proceed as pointed out in the attached .rtf please.

 

Best wishes!

 

Mount EFI.rtfd.zip

Hi! Thank you for your kind reply. I'm afraid I attached the wrong S855 devices text file. I just realized it shows my laptop has an Intel 4000 graphics card, which is not the case. I picked it up from another user who has the same laptop, but obviously, there are different configurations.

Further, the procedure you suggested uses Clover as an install tool, but I think I used Chimera. I just used the Clover Configurator and was able to discover and mount the EFI partition, but I stopped there for fear of wrecking things up.

In any case, I generated a devices report using the Chameleon Wizard, and I've attached that file here. It claims not to have found an ACPI section in whatever it used to boot, and there's no trace of my AMD Radeon graphics card. 

It's just more confusing having more than one mechanism to create a Hackintosh, which adds to the pain and tribulation of newbies like myself. Using the Clover configurator is intimidating at best, and a disaster waiting to happen should I attempt to use it to patch my crippled laptop.

Could you please answer the questions I posed? That will help me greatly. 

NOTE: This reply mechanism does not allow me to attach files. How can I do that? Just to be sure, I'm pasting its contents here for you to see.

Spoiler

Chimera 4.1.0 Branch of Chameleon [2015-04-22 20:46:10]
CPU: Brand String:                Intel(R) Core(TM) i7-3630QM CPU @ 2.40GHz
CPU: Vendor:                      0x756e6547
CPU: Family / ExtFamily:          0x6 / 0x0
CPU: Model / ExtModel / Stepping: 0x3a / 0x3 / 0x9
CPU: Number of Cores / Threads:   4 / 8
CPU: Features:                    0x000002ff
CPU: TSC Frequency:               2394 MHz
CPU: FSB Frequency:               99 MHz
CPU: CPU Frequency:               2394 MHz
CPU: Minimum Bus Ratio:           12
CPU: Maximum Bus Ratio:           24
CPU: Current Bus Ratio:           24
Attempting to read GPT
Read GPT
Reading GPT partition 1, type C12A7328-F81F-11D2-BA4B-00A0C93EC93B
Reading GPT partition 2, type 48465300-0000-11AA-AA11-00306543ECAC
Reading GPT partition 3, type 426F6F74-0000-11AA-AA11-00306543ECAC
Reading GPT partition 4, type EBD0A0A2-B9E5-4433-87C0-68B6B72699C7
Read HFS+ file: [hd(0,2)/System/Library/CoreServices/SystemVersion.plist] 480 bytes.
Read HFS+ file: [hd(0,2)/Extra/org.chameleon.Boot.plist] 994 bytes.
Module 'Symbols.dylib' by 'Chameleon' Loaded.
    Description: Chameleon symbols for linking
    Version: 0
    Compat:  0
Read HFS+ file: [hd(0,2)/Extra/modules/HDAEnabler.dylib] 22196 bytes.
Module 'HDAEnabler.dylib' by 'Unknown' Loaded.
    Description: 
    Version: 0
    Compat:  0
Read HFS+ file: [hd(0,2)/Extra/modules/Keylayout.dylib] 13464 bytes.
Module 'Keylayout.dylib' by 'Unknown' Loaded.
    Description: 
    Version: 0
    Compat:  0
Read HFS+ file: [hd(0,2)/Extra/Themes/Default/theme.plist] 2776 bytes.
Read HFS+ file: [hd(0,2)/Extra/Themes/Default/background.png] 982 bytes.
Read HFS+ file: [hd(0,2)/Extra/Themes/Default/logo.png] 8991 bytes.
Read HFS+ file: [hd(0,2)/Extra/Themes/Default/device_generic.png] 9584 bytes.
Read HFS+ file: [hd(0,2)/Extra/Themes/Default/device_generic_o.png] 16736 bytes.
Read HFS+ file: [hd(0,2)/Extra/Themes/Default/device_hfsplus.png] 9988 bytes.
Read HFS+ file: [hd(0,2)/Extra/Themes/Default/device_hfsplus_o.png] 17101 bytes.
Read HFS+ file: [hd(0,2)/Extra/Themes/Default/device_hfsplus_yos.png] 18023 bytes.
Read HFS+ file: [hd(0,2)/Extra/Themes/Default/device_hfsplus_yos_o.png] 21375 bytes.
Read HFS+ file: [hd(0,2)/Extra/Themes/Default/device_hfsplus_mav.png] 17034 bytes.
Read HFS+ file: [hd(0,2)/Extra/Themes/Default/device_hfsplus_mav_o.png] 20646 bytes.
Read HFS+ file: [hd(0,2)/Extra/Themes/Default/device_hfsplus_ml.png] 20325 bytes.
Read HFS+ file: [hd(0,2)/Extra/Themes/Default/device_hfsplus_ml_o.png] 23500 bytes.
Read HFS+ file: [hd(0,2)/Extra/Themes/Default/device_hfsplus_lion.png] 18395 bytes.
Read HFS+ file: [hd(0,2)/Extra/Themes/Default/device_hfsplus_lion_o.png] 21654 bytes.
Read HFS+ file: [hd(0,2)/Extra/Themes/Default/device_hfsplus_sl.png] 21245 bytes.
Read HFS+ file: [hd(0,2)/Extra/Themes/Default/device_hfsplus_sl_o.png] 24262 bytes.
Read HFS+ file: [hd(0,2)/Extra/Themes/Default/device_hfsplus_leo.png] 23286 bytes.
Read HFS+ file: [hd(0,2)/Extra/Themes/Default/device_hfsplus_leo_o.png] 25858 bytes.
Read HFS+ file: [hd(0,2)/Extra/Themes/Default/device_hfsplus_tiger.png] 10008 bytes.
Read HFS+ file: [hd(0,2)/Extra/Themes/Default/device_hfsplus_tiger_o.png] 17101 bytes.
Read HFS+ file: [hd(0,2)/Extra/Themes/Default/device_hfsraid.png] 10399 bytes.
Read HFS+ file: [hd(0,2)/Extra/Themes/Default/device_hfsraid_o.png] 17115 bytes.
Read HFS+ file: [hd(0,2)/Extra/Themes/Default/device_hfsraid_yos.png] 18501 bytes.
Read HFS+ file: [hd(0,2)/Extra/Themes/Default/device_hfsraid_yos_o.png] 21993 bytes.
Read HFS+ file: [hd(0,2)/Extra/Themes/Default/device_hfsraid_mav.png] 17397 bytes.
Read HFS+ file: [hd(0,2)/Extra/Themes/Default/device_hfsraid_mav_o.png] 21182 bytes.
Read HFS+ file: [hd(0,2)/Extra/Themes/Default/device_hfsraid_ml.png] 20990 bytes.
Read HFS+ file: [hd(0,2)/Extra/Themes/Default/device_hfsraid_ml_o.png] 24224 bytes.
Read HFS+ file: [hd(0,2)/Extra/Themes/Default/device_hfsraid_lion.png] 18686 bytes.
Read HFS+ file: [hd(0,2)/Extra/Themes/Default/device_hfsraid_lion_o.png] 21882 bytes.
Read HFS+ file: [hd(0,2)/Extra/Themes/Default/device_hfsraid_sl.png] 21475 bytes.
Read HFS+ file: [hd(0,2)/Extra/Themes/Default/device_hfsraid_sl_o.png] 24594 bytes.
Read HFS+ file: [hd(0,2)/Extra/Themes/Default/device_hfsraid_leo.png] 23518 bytes.
Read HFS+ file: [hd(0,2)/Extra/Themes/Default/device_hfsraid_leo_o.png] 26187 bytes.
Read HFS+ file: [hd(0,2)/Extra/Themes/Default/device_hfsraid_tiger.png] 10436 bytes.
Read HFS+ file: [hd(0,2)/Extra/Themes/Default/device_hfsraid_tiger_o.png] 17741 bytes.
Read HFS+ file: [hd(0,2)/Extra/Themes/Default/device_ext3.png] 12752 bytes.
Read HFS+ file: [hd(0,2)/Extra/Themes/Default/device_ext3_o.png] 19869 bytes.
Read HFS+ file: [hd(0,2)/Extra/Themes/Default/device_freebsd.png] 16013 bytes.
Read HFS+ file: [hd(0,2)/Extra/Themes/Default/device_freebsd_o.png] 22249 bytes.
Read HFS+ file: [hd(0,2)/Extra/Themes/Default/device_openbsd.png] 16878 bytes.
Read HFS+ file: [hd(0,2)/Extra/Themes/Default/device_openbsd_o.png] 23982 bytes.
Read HFS+ file: [hd(0,2)/Extra/Themes/Default/device_befs.png] 12482 bytes.
Read HFS+ file: [hd(0,2)/Extra/Themes/Default/device_befs_o.png] 17989 bytes.
Read HFS+ file: [hd(0,2)/Extra/Themes/Default/device_fat.png] 9953 bytes.
Read HFS+ file: [hd(0,2)/Extra/Themes/Default/device_fat_o.png] 17982 bytes.
Read HFS+ file: [hd(0,2)/Extra/Themes/Default/device_ntfs.png] 16198 bytes.
Read HFS+ file: [hd(0,2)/Extra/Themes/Default/device_ntfs_o.png] 21613 bytes.
Read HFS+ file: [hd(0,2)/Extra/Themes/Default/device_cdrom.png] 14429 bytes.
Read HFS+ file: [hd(0,2)/Extra/Themes/Default/device_cdrom_o.png] 20231 bytes.
Read HFS+ file: [hd(0,2)/Extra/Themes/Default/device_selection.png] 148 bytes.
Read HFS+ file: [hd(0,2)/Extra/Themes/Default/device_scroll_prev.png] 3995 bytes.
Read HFS+ file: [hd(0,2)/Extra/Themes/Default/device_scroll_next.png] 3898 bytes.
Read HFS+ file: [hd(0,2)/Extra/Themes/Default/menu_boot.png] 137 bytes.
Read HFS+ file: [hd(0,2)/Extra/Themes/Default/menu_verbose.png] 137 bytes.
Read HFS+ file: [hd(0,2)/Extra/Themes/Default/menu_ignore_caches.png] 137 bytes.
Read HFS+ file: [hd(0,2)/Extra/Themes/Default/menu_single_user.png] 137 bytes.
Read HFS+ file: [hd(0,2)/Extra/Themes/Default/menu_memory_info.png] 136 bytes.
Read HFS+ file: [hd(0,2)/Extra/Themes/Default/menu_video_info.png] 136 bytes.
Read HFS+ file: [hd(0,2)/Extra/Themes/Default/menu_help.png] 136 bytes.
Read HFS+ file: [hd(0,2)/Extra/Themes/Default/menu_verbose_disabled.png] 135 bytes.
Read HFS+ file: [hd(0,2)/Extra/Themes/Default/menu_ignore_caches_disabled.png] 135 bytes.
Read HFS+ file: [hd(0,2)/Extra/Themes/Default/menu_single_user_disabled.png] 135 bytes.
Read HFS+ file: [hd(0,2)/Extra/Themes/Default/menu_selection.png] 158 bytes.
Read HFS+ file: [hd(0,2)/Extra/Themes/Default/progress_bar.png] 292 bytes.
Read HFS+ file: [hd(0,2)/Extra/Themes/Default/progress_bar_background.png] 139 bytes.
Read HFS+ file: [hd(0,2)/Extra/Themes/Default/text_scroll_prev.png] 562 bytes.
Read HFS+ file: [hd(0,2)/Extra/Themes/Default/text_scroll_next.png] 557 bytes.
Read HFS+ file: [hd(0,2)/Extra/Themes/Default/font_console.png] 2931 bytes.
Read HFS+ file: [hd(0,2)/Extra/Themes/Default/font_small.png] 9860 bytes.
Read HFS+ file: [hd(0,2)/Library/Preferences/SystemConfiguration/com.apple.Boot.plist] 232 bytes.
Read HFS+ file: [hd(0,2)/Extra/org.chameleon.Boot.plist] 994 bytes.
boot-uuid: 20433FEA-69D0-3541-9512-E1ED29B39ABC
Loading Darwin 10.10.5
Kernel cache file path = /System/Library/Caches/com.apple.kext.caches/Startup/kernelcache
Loading kernel cache /System/Library/Caches/com.apple.kext.caches/Startup/kernelcache
Read HFS+ file: [hd(0,2)/System/Library/Caches/com.apple.kext.caches/Startup/kernelcache] 4096 bytes.
Fat Binary found. Reading thin part only...
Read HFS+ file: [hd(0,2)/System/Library/Caches/com.apple.kext.caches/Startup/kernelcache] 21662746 bytes.
Decompressing Kernel Cache Using lzss
ACPI Table not found: DSDT.aml
No DSDT found, using 0 as uid value.
Using PCI-Root-UID value: 0
LAN Controller [1969:1091] :: PciRoot(0x0)/Pci(0x1c,0x0)/Pci(0x0,0x0)
Setting up lan keys
Read HFS+ file: [hd(0,2)/Extra/smbios.plist] 468 bytes.
SMBus CmdReg: 0x7
Scanning SMBus [8086:1e59], mmio: 0x0, ioport: 0x0, hostc: 0x1
SPD[0] (size): 255 @0x50
SPD[0] (size): 255 @0x51
SPD[0] (size): 255 @0x52
SPD[0] (size): 255 @0x53
SPD[0] (size): 255 @0x54
SPD[0] (size): 255 @0x55
SPD[0] (size): 255 @0x56
SPD[0] (size): 255 @0x57
CPU is Intel(R) Core(TM) i7-3630QM CPU @ 2.40GHz, family 0x6, model 0x3a

SMBIOS rev.: 2.4, DMI rev.: 2.4

Handle: 0x0000, DMI type 0, 24 bytes
BIOS Information
    Vendor: Apple Inc.
    Version: MB{censored}.{censored}.com
    Release Date: 02/27/08
    BIOS Revision: 0.1

Handle: 0x0001, DMI type 1, 27 bytes
System Information
    Manufacturer: Apple Inc.
    Product Name: MacPro3,1
    Version: 1.0
    Serial Number: ** PRIVATE **
    UUID: ** PRIVATE **
    Wake-up Type: Power Switch
    SKU Number: Default SKU#
    Family: Mac Pro

Handle: 0x0002, DMI type 2, 16 bytes
Base Board Information
    Manufacturer: Apple Inc.
    Product Name: Mac-F42C88C8
    Version: MP
    Serial Number: ** PRIVATE **
    Asset Tag: Default Asset Tag#
    Location In Chassis:  
    Type: Motherboard

Handle: 0x0003, DMI type 3, 20 bytes
Chassis Information
    Manufacturer: Apple Inc.
    Type: Unknown
    Version: OEM Chassis Version
    Serial Number: ** PRIVATE **
    Asset Tag: Default Asset Tag#

Handle: 0x0004, DMI type 4, 38 bytes
Processor Information
    Socket Designation: U3E1
    Type: Central Processor
    Family: 0xC6
    Manufacturer: Intel(R) Corporation
    ID: 0x306A9
    Version: Intel(R) Core(TM) i7-3630QM CPU @ 2.40GHz
    External Clock: 0 MHz
    Max Speed: 2394 MHz
    Current Speed: 2400 MHz
    Upgrade: Socket rPGA988B
    Serial Number: ** PRIVATE **
    Asset Tag: To Be Filled By O.E.M.
    Part Number: To Be Filled By O.E.M.
    Core Count: 4
    Core Enabled: 4
    Thread Count: 8

Handle: 0x000c, DMI type 11, 5 bytes
OEM Strings
    String 1: PSKFWC-01L008,TI309495XMB
    String 2: jZhMujmrZJxnD
    String 3: xuov0x617tUYz
    String 4: D5OnHTdo9cY8J
    String 5:                                 

Handle: 0x0010, DMI type 17, 27 bytes
Memory Device
    Error Information Handle: No Error
    Size: 8192 MB
    Form Factor: SODIMM
    Locator: DIMM0
    Bank Locator: BANK 0
    Memory Type: RAM
    Speed: 0 MHz
    Manufacturer: N/A
    Serial Number: ** PRIVATE **
    Asset Tag: Unknown
    Part Number: N/A

Handle: 0x0011, DMI type 17, 27 bytes
Memory Device
    Error Information Handle: No Error
    Size: 8192 MB
    Form Factor: SODIMM
    Locator: DIMM2
    Bank Locator: BANK 2
    Memory Type: RAM
    Speed: 0 MHz
    Manufacturer: N/A
    Serial Number: ** PRIVATE **
    Asset Tag: Unknown
    Part Number: N/A

Handle: 0x0019, DMI type 131, 6 bytes
Apple specific Processor Type
    Cpu-type: 0x703

Handle: 0x001a, DMI type 132, 6 bytes
Apple specific Processor Interconnect Speed
    QPI = 0 MT/s

Handle 0x001b, DMI type 127, 4  bytes
End of Table

SMBIOS orig was = fe120
SMBIOS new is = 3201000
ACPI Table not found: DSDT.aml
Generating P-States config: YES
Generating C-States config: YES
Read HFS+ file: [hd(0,2)/Extra/SSDT.aml] 33774 bytes.
Table /Extra/SSDT.aml read and stored at: 3205000
ACPI Table not found: SSDT-1.aml
No ACPI version 1 found. Ignoring
RSDP version 2 found @fe020. Length=36
RSDT @af7fe124, Length 104
TABLE FACP,FADT found @af7fb000, Length 268
FADT: ACPI Restart Fix applied!
Start finding cpu names. length 33796
DSDT: 5b83
Found ACPI CPU: CPU0
DSDT: 5b83
Found ACPI CPU: CPU1
DSDT: 5b83
Found ACPI CPU: CPU2
DSDT: 5b83
Found ACPI CPU: CPU3
DSDT: 5b83
Found ACPI CPU: CPU4
DSDT: 5b83
Found ACPI CPU: CPU5
DSDT: 5b83
Found ACPI CPU: CPU6
DSDT: 5b83
Found ACPI CPU: CPU7
End finding cpu names: cpu names found: 8
SSDT with CPU C-States generated successfully
C-States generated
P-States: min 0xc, max 0x18
SSDT with CPU P-States generated successfully
P-States generated
TABLE UEFI,TABLE ASF!,TABLE HPET,TABLE APIC,TABLE MCFG,TABLE SLIC,TABLE WDAT,TABLE SSDT,TABLE BOOT,TABLE ASPT,TABLE DBGP,TABLE SSDT,TABLE FPDT,TABLE MSDM,TABLE SSDT,TABLE SSDT,
RSDT: Added 3 SSDT table(s)
RSDT: Original checksum 33, New checksum 21 at 3212000

XSDT @0;af7fe210, Length=172
FADT found @0af7fb000, Length 268
FADT: ACPI Restart Fix applied!
copied (OEM)
copied (OEM)
copied (OEM)
copied (OEM)
copied (OEM)
copied (OEM)
copied (OEM)
copied (OEM)
copied (OEM)
copied (OEM)
copied (OEM)
copied (OEM)
copied (OEM)
copied (OEM)
copied (OEM)
copied (OEM)
Added 3 SSDT table(s) into XSDT

RSDP: Original checksum 201, New checksum 184
RSDP: Original extended checksum 188, New extended checksum 120
ACPI version 2 patching finished

Starting Darwin x86_64
Boot Args: kext-dev-mode=1 

 

Share this post


Link to post
Share on other sites
  • 0

Imo clover should be best for your config,so make a clover USB to test on lapi.

Intel HD should work with Ig-platfrom-id=0x01660003 or 4

Dual gpu for laptop not going to work in OSX so you have to disable AMD card (bios or in DSDT) or remove AMD kext for HDD/USB.

The above EFI folder (by noway) should work ..just install clover in a  USB and try

 

Keep us posted

 

Good hack

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Answer this question...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Recently Browsing   0 members

    No registered users viewing this page.

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.